DTF Heat Press Settings: Time and Temperature Chart (Free Printable)

I am so excited to share this DTG time and temperature cheat sheet with you guys. 

I'm gonna be real honest. I made this for myself because I was tired of repeatedly having to look back at my own tutorials just to remember what temperature my heat press or curing oven needed to be on to press transfers. I can't be the only one...so I created this printable DTF and DTG transfer time and temp chart that you can print and keep close by.

DTF heat press settings, quick answer

If you just need the number and you're standing at your press right now: press DTF transfers at 320 F to 356 F (160 C to 180 C) for 10 to 20 seconds, then peel and post press at the same time and temperature. 

You don't need a cover sheet for the initial press. Full settings, including the powder curing step, are below. 

DTF settings chart

These work for any garment color, which is one of the nice things about DTF. There's no separate setting for lights and darks the way there is with DTG. 

Step	Setting
Powder curing temperature	250 F / 120 C
Powder curing time	120 seconds in a curing oven
Pre press the garment	Yes
Application temperature	320 F to 356 F / 160 C to 180 C
Application time	10 to 20 seconds
Post peel press	Yes, same time and temperature
Cover sheet	Not needed
Garment color	Any

The powder curing step only applies if you're printing your own transfers. If you ordered them, they arrive cured and ready to press, so you skip straight to pre pressing the garment. 

DTG heat press settings

DTG is a different animal because pretreatment and garment color both change what you do. 

Garment	Pretreat	Temp	Time	Pressure
White	No	338 F	30 to 45 seconds	5 (50 psi), medium
Black	Yes	338 F	75 to 90 seconds	5 (50 psi), medium
Dark	Yes, if white ink is used	338 F	75 to 90 seconds	5 (50 psi), medium

All three need a pre press and a fixing or heat set step, and all three use parchment paper as a cover sheet. 

The big difference is time. A white shirt with no pretreatment presses in about half the time of a black one, because there's no pretreat and no white ink underbase to cure. 

Why your settings might be different

A few things will change the numbers above, so don't treat any chart as gospel, including mine. 

Film brand matters most. Different DTF film and powder want different settings. If your supplier gives numbers, start with theirs and use this chart as a sanity check. 

Your press probably isn't accurate. Most heat presses read a few degrees off and some are off by a lot. If transfers are lifting at the recommended setting, that's the first thing I'd check. 

Bought transfers beat my numbers. If you ordered your transfers, whoever printed them knows exactly what film they used. Their instructions win. 

When in doubt, press one on a scrap and wash it before you run a whole order. 

Get the free printable chart

Want all of this on one page you can print and stick next to your press? Tell me where to send it and I'll email it over. 

Send Me the Cheat Sheet

Yes, please send me the downloadable and printable DTF and DTG settings chart.

Thank you!

You have successfully joined our subscriber list.

Want More DTF help? 

Still deciding on a machine? I put my picks in one place: best DTF printer for small business. 

Weighing DTF against sublimation? Here's the full side by side comparison. 

Garment Creator 2 Setup Made EASY - Video Tutorial

If you just got the Epson F1070 or F2270, this is the very first thing you’ll want to do.

Before you even turn on your printer, you can go ahead and download Garment Creator 2—the free software that runs both models.

Desktop DTF and DTG Printer for Home Business! Unboxing the Epson F1070

If you've been looking for an affordable desktop printer that can do both DTF (Direct-to-Film) and DTG (Direct-to-Garment) printing, this might be exactly what your home business needs. 

The dual purpose F1070 is Epson's first desktop size DTF/DTG printer specifically for home businesses. It's not only easy to use but it's easy to maintain and has a price point under $6500. 

Read on for my full unboxing of the Epson F1070..and check out my exclusive interactive tool to quickly decide if the F1070 is right for you!

Roland BT-12 Direct to Garment (DTG) Printer vs Sublimation Printing

Sublimation has become very popular with Silhouette crafters for the ease of use, ability to use the same designs as Silhouette Studio, and stunning vibrant colors. 

The biggest drawback to sublimation is you can only sublimate onto blanks with a poly coating, and in the case of apparel, polyester.  For some small t-shirt businesses that leaves a pretty big void without being able to apply to cotton shirts. Sublimation's cousin, Direct to Garment or DTG, fills that gap with the ability to print directly onto cotton or textile products with at least 50% cotton.

How to Start a Small T Shirt Business With a Silhouette CAMEO

If you're a beginner looking to start a tshirt business with Silhouette CAMEO, I have so much info to share with you today that I jammed it into a video! 

We're talking the biggest mistakes to avoid when starting an at home t shirt business and the best equipment to have to set up your shirt business.  Plus pros and cons of various at home heat transfer printers and where HTV shirts SHOULD fit into your business. 

Desktop DTF Printer News: Big Changes....from Three Major Manufacturers

If you're in the desktop direct to film (DTF) world - big changes to share today.

 

It's not often that three of the big manufacturers of desktop DTF printers all announce changes on the same day. But here we are...

DTF and DTG Printer in One: Epson F2100 Everything You Need to Know

If you're looking for a t-shirt printer that will do it all to take your t-shirt business to the next level, I may have finally found the one. 

The Epson F2100 is a DTF and DTG printer in one meaning it can print directly on darks, lights, any fabric type and DTF film. It prints white, works on MAC and PC, has relatively easy maintenance, and includes everything you need to get started - including ink.  

That's a lot of box checking, right?

The Epson F2100 DTG and DTG Printer is as close to a do it all printer for t shirts and DTF transfers that you're going to find under $12k $10k (new price reduction!!).  This is not a printer for crafters - the size, the price, the use requirements to maintain it are just not for anyone who's not consistently selling.  

But for small businesses looking to stop turning down shirt orders that a sublimation printer isn't up for (at least efficiently) while also having the ability to print the finished garment or the ready-to-press transfer the F2100 is a great option.  Read on to find out more about the Epson Surecolor F2100 DTG and DTF combo printer. 

SVG Designs: Why They're the Best Cut File Type for Crafters

SVG designs are extremely versatile as far as how they can be used and in which software programs and  machines they can be used with.  The same SVG design can be used to make everything from stencils to stickers to laser cut projects to sublimation transfers and vinyl decals

For this reason Scalable Vector Graphics, or SVGs, are my favorite cut file type. It also means when you add new equipment to your craft room or invest in your small business you don't need to start all over with your designs.  Check out all these different ways you can use the same SVG designs

Which Printer Should I Get Next? Sublimation vs DTG vs DTF vs White Toner Printer vs Roland BN-20A

One of the best things about Silhouette Studio is not only how powerful a program it is, but the fact you can export from it in various file types allowing for printing on a wide range of printers. 

When it comes to pairing a printer with Silhouette Studio or Silhouette CAMEO, print and cut is usually the first thing to come to mind. But it's only the tip of the iceberg when it comes to printing and Silhouette! 

Roland BT-12 Direct to Garment Printer Beginner Tutorial and First Project

The Roland BT-12 Direct to Garment (DTG) Printer is a really easy and fast DTG printer for the small home-based craft business. 

The direct to garment printer allows you to print on cotton, filling a void left open by sublimation which requires a high polyester count or polyester coating for hard goods. This tutorial will walk you through a beginner first print with the Roland BT-12 DTG printer and finishing oven. 

Roland BT-12 Direct to Garment Printer Unboxing and Setup

Setting up the Roland BN-12 Direct to Garment printer is a pretty quick and easy process..you can literally go from opening the box to completing your first print in less than an hour. 

One of the great things about the Roland BN-12 DTG is just how beginner friendly it is even if you've never printed directly to garment before. This beginner Roland BN-12 unboxing and set up tutorial will take you through step by step.  

If you're not even sure what Direct to Garment (DTG) is or how it's different than sublimation, you can check out this tutorial for an introduction to DTG.