Copyright Silhouette School 2016. Powered by Blogger.

Cutting Cardstock with Silhouette CAMEO: Secrets and Cut Settings from the Pros!

I'm so excited that the queen of Silhouette Paper Crafts and Designs, Lori Whitlock is on the blog today! Lori's here to share her pro tips on cutting cardstock cleanly with Silhouette CAMEO and Portrait!

Hi everyone! I’m Lori Whitlock and I’m so excited that Melissa asked me to do a guest blog post for you all today. I’ve been designing for Silhouette for over 7 years now (since the beta version of the Design Store was around). If you’ve seen my work you know that I do a lot of card making and 3­ D design so I am using my Silhouette to cut paper and card stock all the time.

With over 5400+ designs I would say I’ve practiced cutting paper A LOT. At some of the events that I attend I’m astounded at the number of people that I have met that have never tried to cut paper/card stock with their Silhouette.

Let me just tell you a little secret... it’s really not that hard! So, let’s give it a try! You should be able to get beautiful clean cuts from card stock or patterned paper. I’ve taught several classes and find that Silhouette crafters can get frustrated trying to get clean cuts. But, I’m here to tell you that if you get everything set up properly your Silhouette CAMEO or Portrait should cut card stock just like butter. It might take a little practice, but I promise you can get it figured out.

Here are a few tips: First, use a good quality card stock. Cardstock is made up of fibers. Lesser quality cardstock has fibers that tear and pull apart easily (think construction paper). These fibers will create a cutting mess and clog the blade housing. 

A good quality card stock has tighter fibers and cuts beautifully. I also design for Echo Park Paper Co. and their printed card stock is excellent quality. Most scrapbook companies print on a good quality paper. 

Second, make sure you have a nice sharp blade especially if you’re cutting intricate pieces. However, if you are cutting larger items without intricate pieces a blade that has some use on it will typically do just fine. 

Also, make sure that your blade is clean. 

Next, do a practice cut on a scrap piece of paper so that you don’t waste the paper you planned for a project. Adjust the settings until you get the desired result. 

Lastly, get your settings adjusted properly. I am here to tell you that everybody has a little different formula for their blade setting, speed, and thickness (pressure) when it comes to cutting paper. There are a lot of variables here. You have to consider the weight of the paper, your machine, how old your blade is, how intricate the design is, etc. So, I can’t give you an exact formula that works for EVERY situation. 

Here’s what works for me: I cut A LOT of card stock and I’m always on a deadline, so I cut card stock as quickly as I can at a speed of 10 (unless it’s really intricate... then I slow it down). I use the card stock setting in the Cut Settings window. It recommends a blade setting of 5, however, I’ve found that if I set my blade one notch higher to a 6 I get a much cleaner cut (do not change it on the screen... this does nothing, you have to physically remove the blade from the machine and change it). 

If my test cut isn’t quite clean I will move the thickness up to 21-­25 depending on what works (I don’t like to set the thickness deeper than necessary as this will dull your blade and is rough on your mat). 

I don’t automatically double ­cut (remember, I’m in a hurry). BUT, after I cut, I NEVER remove my mat from the machine until I check to see if it’s cut cleanly. To do this I just use the spatula or my fingernail to lift a piece of the cut design off the mat (90% of the time it's a clean cut on the first round). If it comes up cleanly then I remove the mat from the machine. If it’s not a clean cut, I simply hit “Send to Silhouette” again. The machine will cut the design again in precisely the same position. Then, I check it again. If for some reason it’s still not clean, then I can adjust my blade depth or thickness and send again. But, I usually don’t have to do that. Here's a little video I put together that might be helpful with a few more tips...

That’s the way I do it, but as I mentioned, there are several methods or systems that people use for cutting paper. So, I surveyed my Creative Team (the best paper cutters I know) to find out what works for them.

Here are some tips from them:

 “I used to cut on cardstock on the cardstock setting, but I found that the shapes didn't always cut well. Now, for most basic projects I set the Silhouette to Glitter Cardstock so I know it will automatically double cut. I also cut most items at a blade depth of 6 and a cut speed of 8, unless the design is very intricate or I'm using vinyl or vellum.” –Teri  

“These are my preferred settings: textured cardstock (80lb) speed 4, blade 6; Patterned paper speed 5, blade 5; Silhouette Chipboard speed 1, blade 7, double cut; Sticker paper speed 8, blade 2; sketch pens ­ always double write.” – Kathy  

“If my shape I am cutting is really intricate, has a lot of curves, or includes letters, I always double cut. Nothing is more frustrating than having your shape not cut all the way out! It takes a little longer, but I waste so much less paper this way.” –Tya  

“I like reversing/mirroring the image before cutting. I think the underside always looks nicer than the cut side so this solves that problem. It's particularly helpful when using a paper with a white core or for intricate designs & scripty titles.” – Mendi  

“My favorite mat is the Silhouette mat. If it has lost it's grip you can wash it using a vegetable brush, a drop of dish soap and tepid water. Don't scrub too hard, rinse well and hang dry. This will help the mat be sticky again.” – Teri  

“You can clean your blade by removing the blade, setting blade depth to 10 and blow air through the blade area to dislodge any paper dust and fragments.” – Kathy  

Make sure your mat is relatively clean. If you have lots of bits stuck to the mat, and try to cut another piece of paper over them, the blade may skip and not cut as cleanly. ­ - Kathy  

"If you're cutting lighter weight paper or vellum it's best to use a "seasoned" mat (somewhat used) or a light grip mat so that you don't have troubles removing the material from the mat." - ­ Teri

Hopefully you picked up a few tips from all of us. I challenge you to go grab your mat and put down a piece of card stock give it a try. I promise it’s not that difficult. My Silhouette CAMEO is the one paper crafting tool I could never give up. It has literally opened up a whole new world of paper crafting possibilities for me over the past decade.

Please feel free to check out the blog for more cutting inspiration and tutorials. In fact here is a list of where you can find me: Blog: Silhouette Shop: SVG Shop: YouTube: Facebook: Craftsy Class: 50% OFF Instagram: Pinterest:

Another article filled with great paper cutting tips was written by Melissa and shared with my blog readers is in THIS post. You might want to check that out, also.
Thanks for joining me today!


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!

Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


  1. I don't see Lori's video just ads. Should I see it from my iPhone? Thanks for the tips!

  2. Thanks for your tips, very helpful.

  3. Very helpful. Thank you. By chance, do you have any recommendations for settings to cut photo media? I haven't had great luck cutting commercial photos.


  4. Thanks for the tips. I have had so much frustration with this machine. As I watch videos like this one and read blogs, things are improving.

  5. Hi, I have a Cameo 2 and my cut blade setting goes to 3 for card stock. It has never told me to cut at a 5. Should I just ignore it and put it on a 6?
    I often have trouble getting clean lines. I thought it was because I am a beginner and have been using different brands (some cheap) of paper.

  6. And last but not least take the mat from the cardstock and nog the cardstock from the mat!!!

  7. Thanks for the great tips, Lori, - especially to never remove your project until you've checked the cut! I didn't know you could send a project back a 2nd and even 3rd time and the Silhouette would precisely cut the SAME AREA. What an amazing little machine. I love your designs!!

  8. Thanks for the cutting tips! I tried to follow your link for Melissa's article on your blog but it did not direct me to the article.

  9. Hi, Lori, I'm a big fan of your designs, so I already bought many of them (although I didn't find the time yet to try them all out...).

    I've always loved to create cards, so I bought a few punches, a few years ago, but they are pretty expensive! And then a friend of mine told me about the machine she bought (although for another purpose) and that I would probably love it too.
    Well, she was certainly right about that!
    Meanwhile I've used it for heat transfer (T-shirts for my grandchildren!), etching (I also plan to make stamps and magnets with it!) and of course making cards. I've already saved a lot of money with it, since I can cut anything I want, now, in stead of buying those expensive punches!

    Anyway, I already discovered everything you mentioned here myself, but the only thing I didn't have an idea yet how to use it, was how to set the speed and blade depth, so now you helped me out with that as well!
    Thanks for everything!

  10. I cut cardstock a lot as I am a scrapbooker. The problem I have is with patterned paper as it tends to stick to the mat more and rips when being removed even with a tool. Any tips on cutting/removing patterned paper?

    1. I bought the Light Hold mat and it is so much better for patterned papers. Much less tacky.

  11. I LOVE LOVE LOVE Mendi's suggestion to mirror and cut from the back. She's right - the underside does look nicer! I'm making 68 birthday cards for the teachers at our school - and it was driving me crazy that sometimes - especially on intricate designs - that you could see that white core - even if only slightly. I mirrored the image and cut it - I LOVE IT! I can't believe I knew thought of this. GENIUS!! Thank you MENDI!!!!!!

  12. Apparently no one replies questions here, but I'm gonna try anyway. Can I cut cardstock without the mat, or is there any way to cut a longer pattern? I make pastries for a living and I am wanting to make my own boxes, but I would like to cut a bunch at once instead of having to reload every 2-3 boxes. Any advice would be appreciated, thanks!

    1. I cut EVERYTHING without a mat!
      I used the mat 1 time & it was a MESS! Everything stuck & tore, as I tried to remove from mat! I've never tried mat again!!

  13. hello, i just got my silhouette cameo 3 a few days ago. i am still trying to work everything out. i am having problems with my matt sliding around when i am trying to cut my cardstock. how can i fix this? also where is a great place to get graphics? thank you for all of your help

  14. Thank you lorie love your designs but will now enjoy cutting them you explained how to cut with the silhouette thank you


Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.