Copyright Silhouette School 2016. Powered by Blogger.


Glitter Heat Transfer Vinyl for Dishwasher Safe Mugs

Did you know that Glitter Heat Transfer Vinyl can be cut with Silhouette CAMEO and then applied to ceramic to make dishwasher safe mugs?!  It's true...and it's amazing!

Silhouette America Blog, Silhouette 101, glitter heat transfer vinyl, gold glitter heat transfer vinyl, coffee mug


Weekly Silhouette School contributor Becky Dykes is here today to show us exactly how you can add HTV to mugs! Here's Becky...

So you know from our past experiments (remember when we tested it out on glass?) that Heat Transfer Vinyl isn't just for fabrics anymore.  Little did most of us know that it would soon be the answer to personalized and dishwasher safe mugs!

Not only are they super easy, but they save you the mess of using actual glitter for mugs. 

Cutting Glitter HTV with Silhouette CAMEO or Portrait

To start out, go ahead and set up your design in Silhouette Studio.  Be sure to measure the cuttable area of your mug to make sure your design is sized appropriately.  Don't forget to mirror your design, as it will still be applied in reverse.  It's also important to note that we are going to cut glitter HTV, not smooth.

glitter heat transfer vinyl, gold glitter heat transfer vinyl, coffee mug, glitter vinyl heat transfer, heat transfer glitter


Cut the HTV like normal with your Silhouette CAMEO and then weed it.

glitter heat transfer vinyl, gold glitter heat transfer vinyl, siser glitter heat transfer vinyl, silhouette studio, dishwasher safe mug

How to Apply Glitter HTV to Mugs with an Iron

Once your design is cut and weeded, line it up with your coffee mug to judge your placement. To apply the glitter htv to the mug, we used a household iron.  I used my handy dandy Crafters Cradle to hold the mug in place while I worked.  Since the HTV carrier sheet is sticky it's enough to hold the HTV to the mug.

coffee press mug, crafting gadget, crafting gadgets, silhouette tools, silhouette accessories


Using a household iron, and a thin fabric barrier, I applied heat to the mug and HTV.  Remember, when using an iron, you want to make sure you turn the steam off and set the temperature to a cotton or linen setting (usually the highest temperature). As you apply heat to the HTV, keep your iron moving along the curved surface and apply even pressure (without cracking the mug).

iron on htv, glitter heat transfer vinyl, gold glitter heat transfer vinyl, glitter vinyl heat transfer, heat transfer glitter

Since I used a two color design, I removed the first carrier sheet and then layered the second color and pressed again.

And now for the big reveal of my coffee mug with glitter htv... 

iron on htv, glitter heat transfer vinyl, gold glitter heat transfer vinyl, glitter vinyl heat transfer, coffee mug HTV


I love my new coffee mug and I've been washing it in the dishwasher for about two weeks with no sign of wear or early peeling!  Of course, dishwasher temperatures and settings will vary, but I believe you'll find this HTV trick is much more durable than regular adhesive vinyl on mugs.  

If you're interested in this simple but FREE cut file (of course), join us over at My Paper Craze and download a copy for yourself!

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!
Pin It!

 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.png

Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.

www.silhouetteschoolebook.com

37 comments

  1. This is WONDERFUL news! Thank you for sharing!
    Unfortunately, over at Paper Craze, the cut file is not easily found. Can you readjust the link? Thank you so much.

    ReplyDelete
    Replies
    1. It worked for me. It is right in the middle between two mug pictures. thanks for the file!

      Delete
  2. Melissa, you and Becky continue to amaze me, THANK YOU both for all of you tutorials (see you both in November)

    ReplyDelete
  3. Melissa, you and Becky continue to amaze me, THANK YOU both for all of you tutorials (see you both in November)

    ReplyDelete
    Replies
    1. umm... I'm new to the "Silhouette world" .... what's in November?

      Delete
  4. I can't wait to try this. I love coming here to learn new things.

    ReplyDelete
  5. I've been pressing the htv glitter vinyl on my mugs using my mug press. Works like a dream!!!!

    ReplyDelete
  6. I would have never known!! I love using HTV but I would have never thought about it for a mug!! Thanks!!

    ReplyDelete
  7. Soooo ... I am guessing you can use regular HTV on mugs as well?? Mind. Blown.

    ReplyDelete
  8. what is the font for but first? and can you use regular htv?
    thanks!!!!

    ReplyDelete
  9. Hello, I love this technique! Do you think it would work on the Yeti Metal tumblers as well?

    ReplyDelete
  10. You mention that it is important that this is glitter HTV. Why does it need to be glitter?

    ReplyDelete
  11. Where did you get your mug? I've been looking for ones similar.........!?

    ReplyDelete
  12. could you do this on the yeti-type cups?

    ReplyDelete
  13. Hello! How do you set the mug press? How much time and heat? And what kind of mug do you use?
    Thanks

    ReplyDelete
    Replies
    1. Christine TrussellJuly 8, 2016 at 9:28 AM

      Cotton settings, you'll have to pay attention, lift up the fabric and check the vinyl. You don't want it to melt. It's a preference. When I use htv on wood, I iron it like you would iron clothing. I always keep checking the vinyl to see how well it adheres to the wood, or ceramic, after I'm finished and its cool. I'll go back and lightly iron it again. Just use your highest iron settings, no steam.

      Delete
  14. Christine TrussellJuly 8, 2016 at 9:22 AM

    I use glitter on my wood signs as well, I use either a regular iron or a small quilters iron. The quilters iron gets extremely hot, becareful!!

    ReplyDelete
  15. So these heat settings are for ceramic only correct?

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. can I use the the same process to make glass coasters? and will they be dishwasher safe

    ReplyDelete
  18. Great idea! BTW I am using Oracal 751 C vinyl on my mugs and “burn” it in to make them dishwasher-safe. It is a method I have seen suggested on two German blogs but nowhere else. I find it works very well to make a mug with a vinyl dishwasher-safe:

    Apply your vinyl motive to mug or glass (obviously make sure it is clean to ensure a good hold).
    Put the mug / glass on a rack into a cold oven. Heat oven to 150-175° C / 300-350 F and leave it in for an hour. Let object cool in the oven after turning oven off.

    Obviously, you shouldn’t put food into the oven at the same time and make sure to ventilate the kitchen afterwards. I haven’t smelled anything odd, but be careful just in case. The blogger I got the idea from even contacted Oracal and got the answer that heating the vinyl would not produce noxious fumes (except if you actually burn it :-)

    The mugs I have done this with have withstood the dishwasher without ill effect for a good long time now.

    ReplyDelete
    Replies
    1. Would this method work with Oracal 631 or 651? Or does it only work with 751 C?

      Delete
  19. Could you use a heat gun instead of an iron?

    ReplyDelete
  20. I tried it on my stainless cola shaped water bottle(with a painted surface) and it came out great. I even did some layering. I used regular HTV and metallic HTV. I suppose it would work on anything that the iron wont melt. Look out world here I come with HTV in one hand and an iron in the other.

    ReplyDelete
  21. This is great news. I had thought only sublimation would work on ceramic. Thanks!

    ReplyDelete
  22. I tried regular (non-glitter) HTV on a glass pint glass using an iron just like the tutorial above, but it didn't work. Melted on there fine (I checked around all the edges with my nail), but when I tried to wash it, it all peeled off. Definitely not dishwasher proof! Everything had a sort of halo to it before I washed it too.

    ReplyDelete
  23. I tried and tried and the HTV would NOT adhere to a ceramic mug. Did you prep the mug first? I was using a heat press but it was not sticking AT ALL! So disappointed, I wanted a mug like the one in the tutorial. Ugh!

    ReplyDelete
  24. Water may leak out and manifest through soapy residue. Mineral accumulation is still another common issue that results from hard water. Many times, dishwashers make loud sounds that indicate either an urgent repair or replacement need. Owners frequently complain that the dishwasher cycle fails to complete. This malfunction results in inadequate dish cleansing.induction cooktop

    ReplyDelete
  25. I really love the glitter vinyl. Having trouble on my silhouette cutting glitter vinyl. I tried using heat flocked setting I need help setting th speed, the blade etc

    ReplyDelete
  26. I have tried this several times w/ 3 different brands of glitter htv. Each time the htv goes on just as it should, but once it cools something as simple as a gentle rub causes letters to come off. Does the surface need to be prepped a certain way? Please help.

    ReplyDelete
  27. I followed this tutorial and they letters rubbed right off with a gentle hand washing.....suggestions?

    ReplyDelete
  28. Can you use any HTV or only glitter. A few months have gone by since this post so how about an update on how it's holding up in the dishwasher please.

    ReplyDelete
  29. Thanks for sharing this great technique. I tried this at home and amazingly it really worked!!

    ReplyDelete
  30. Hi, It's amazing project, I can't fine glitter HTV here in Mexico, can I use the same vinyl to the Tshirt?

    ReplyDelete
  31. I have tried and tried this. The htv peels right off. Using alcohol to clean the mug, tried several kinds of htv, used my household iron, used my craft iron. Pressed and pressed and pressed. Worked at it for a long time. Looks like it was adhered well. Removed the carrier sheet after about 30 seconds. Once it got cool, it peeled right off. Any suggestions???

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.