Copyright Silhouette School 2016. Powered by Blogger.


Personalized Name Keychains with Silhouette's Offset Tool (Paper & Epoxy)

The offset tool is such a handy feature in Silhouette Studio because it doesn’t just enlarge an image, it creates an even outline all around the edge of any shape.

Offset, Paper Crafts, Epoxy, silhouette 101, silhouette america blog

This tool can be used in many different ways, even to create these unique personalized name keychains!

You could pretty much use any font you want for these keychains, but script fonts where the letters connect together work the best!

script fonts, craft ideas, offset, paper crafts, silhouette cameo

I used two different fonts in the Script Font Bundle 4.0 available at So Fontsy. It is jam packed with 18 beautiful fonts to choose ...and they're just over $1 each right now for a limited time!

Silhouette SVG, Cricut SVG, Silhouette fonts, Cricut fonts, Commercial use SVG


To make the keychains, first type your name and click on it to make sure it is selected. Then, go to Offset tool panel in the right-hand toolbar and click Offset.

The default is set 0.125, but you can adjust it smaller or larger if you want, which you’ll see previewed around the name. Click Apply when you want to finalize the offset.
 
script fonts, craft ideas, offset, silhouette studio, silhouette cameo

Now, with some fonts and offsets, you’ll get these really teeny tiny offset shapes between each letters or parts of one letter. You could choose to leave them in, but since these shapes are so small and sometimes hard for your machine to get a clean cut, you can make things so much easier and faster in this project by removing them.

To do that, right click on the line of the offset and click Release Compound Path. What will happen is those “inner” pieces from the offset (plus the offset outline itself) will now be selected - you can tell because there is a gray outline around each of them. Note: the original name is NOT selected.

script fonts, gift ideas, offset, silhouette studio, silhouette cameo

Since you want to delete everything in the offset except the outermost offset line itself, you want to deselect that line. So, hold down shift on your keyboard and click right on the line of the outermost offset. This will now deselect that part (and only that part) and now just the “inner” shapes of the offset will only be selected (see how there’s a gray box only around those parts?). Now, just hit delete on your keyboard and boom they’re gone!

script fonts, gift ideas, offset, silhouette studio, silhouette cameo

 The third and final thing you want to do it create an offset of the offset, the same way you just did the first one. Again, you can adjust the size smaller or larger, but I just used the default for this project.

script fonts, gift ideas, offset, silhouette studio, silhouette cameo

Apply fill colors to the offsets and move the bottom offset off to the side. You now need to add a hole to this layer so you’ll be able to attach the finished project onto a keychain.

Open the shapes panel in the left-hand tool bar and select the donut.

script fonts, gift ideas, keychain, silhouette studio, silhouette cameo 4

Draw a small donut next to the outermost offset of the keychain and move it so that it overlaps just a little bit. Select both the offset and the donut than, then click the weld tool in the quick access toolbar.

script fonts, gift ideas, keychain, silhouette studio, silhouette cameo 4

Next, it's time to start cutting! Cut the offsets out 6 times each from medium to heavyweight cardstock. The top layer just cut out 3 times. If you like to be conservative with your glitter cardstock, you can only cut the name out once from the glitter and then the other two from plain white cardstock (since those will be covered up anyway).

script fonts, card stock, keychain, paper crafts, silhouette cameo 3

Then, you’re ready to assemble. Glue all the layers of the first offset together with Mod Podge. Use a foam brush to swipe a fair amount across each layer of cardstock, then press another cardstock layer on top.

script fonts, card stock, keychain, paper crafts, silhouette cameo 3

Next, glue 5 of the cardstock layers of the second offset (the bottom layer) and set one aside to use later – we’ll come back to it. Make sure you press the layers together really, really tightly.

mod podge, card stock, keychain, paper crafts, silhouette cameo 3

For the name itself, if you chose a super thin scripty font, just very lightly dab the Mod Podge on and use tweezers to get the cardstock layers together.

script fonts, card stock, keychain, paper crafts, silhouette cameo 3

Next, Mod Podge the first offset stack on top of the bottom offset stack. And then Mod Podge the script name stack on the very top.

script fonts, card stock, keychain, paper crafts, silhouette cameo

For the glitter layer, if you you don’t want glitter pieces spreading all over the rest of the keychain, paint the Mod Podge just over the glitter to seal it in. Let that dry, then apply another coat over the entire thing, even on the sides of the stacks of cardstock.

You want to make sure you use enough Mod Podge so the paper is completely sealed. Then, let it dry completely - until the Mod Podge is completely clear.

mod podge, card stock, keychain, paper crafts, silhouette cameo 3

This last step is what really brings out the shine and makes this project super special – adding the shiny epoxy gloss.  Read the safety instructions carefully before using epoxy which include wearing a mask, gloves and working in a well-ventilated area.
Use a small brush to paint on the epoxy (make sure it’s not your favorite brush because this will be a one-time use only brush because you’ll have to throw it away after you’re done).

mod podge, card stock, keychain, paper crafts, silhouette cameo project

Start in the middle and work your way out, with just a little at a time and using the brush to spread it out. Work on a nonstick, epoxy safe surface like the Ken Oliver Best Craft Mat Ever, so if a little spills off the edge it’s okay. Just move the keychain to another spot on the nonstick surface and continue.  

Now you have to wait for the epoxy to cure, anywhere from 24-48 hours. Then, after it’s cured, when you flip it over, you’ll see the backside probably doesn’t look too pretty. But that’s okay because remember that extra piece we set aside. 

Use your Mod Podge just like before and align that last layer on the bottom, covering up any messy bits for a nice clean back to your keychain. Seal the bottom with another layer of Mod Podge. You could then also apply a thin layer of epoxy to the back as well, but that is optional.

mod podge, card stock, keychain, paper crafts, silhouette cameo project

Now just add your keychain, accessories, and your keys because you’re done!

mod podge, card stock, keychain, paper crafts, silhouette cameo project

Script fonts really do work best for a project like this because most (if not all) of the letters stay connected, so gluing the layers together goes so much faster. There are so many beautiful fonts to choose from in the Script Font Bundle 4.0 at So Fontsy, so be sure to check out this bundle before its gone! 

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com


5 comments

  1. If you don’t want to use a script, say for a male recipient, use a bolder font and use the ‘weld’ function to attach them together.

    ReplyDelete
  2. I've never purchased epoxy before. Are there some brands you prefer? locations that sell epoxy? This looks like a fun project. TY

    ReplyDelete
    Replies
    1. Would like to know about the epoxy also

      Delete
    2. I would like to know this as well. Also, I'm looking online and see that it comes with two bottles, a resin and a hardener. Are both needed?

      Delete
  3. Thanks! Looks like fun and easy. Think I’ll try it!

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.