Copyright Silhouette School 2016. Powered by Blogger.


Converting Silhouette Studio Files to PDFs

Did you know it's easy and fast to convert Silhouette Studio files to PDF format?

Silhouette Studio, PDF convert, PDF, Silhouette America Blog, Silhouette 101

You can do Save as a PDF from Silhouette Studio two different ways depending on the software version and upgrade you have.

What you want to do is create your design in Silhouette Studio as you normally would.   Keep in mind you need to make sure that everything you want saved to the PDF is within the Print and Cut borders. Both can be turned on from the Page Set Up tool.

Anything outside those areas will not be saved as part of the PDF.

Silhouette Studio, PDF convert, PDF, save as PDF, Silhouette Studio Software tutorials

If you have Silhouette Studio V4 with Business Edition you can save as a PDF by going to File > Save As > Save to Hard Drive.

Silhouette Studio, PDF convert, PDF, save as PDF, Silhouette Studio Software tutorials

In the window that pops up, change the file "Format" to Portable Document Format (PDF).

Silhouette Studio, PDF convert, PDF, save as PDF, silhouette studio business edition

If you do not have Silhouette Studio Business Edition (or if you have not updated to Silhouette Studio V4), you'll need to use the Print tool to export a PDF from Silhouette Studio.

Click on the printer icon as if you are going to send your design to the printer. (Don't worry, you're not going to print.)  On the pop up window, you'll see the little PDF button at the bottom left.

Click it and you'll get a drop down mention with the option to Save as PDF.

Silhouette Studio, PDF convert, PDF, save as PDF, Silhouette Studio Software tutorials

You can then re-name the file if necessary and Save to save the PDF to your computer's hard drive.

Silhouette Studio, PDF convert, PDF, save as PDF, Silhouette Studio Software tutorials


That's all there is to it.  You can navigate to where your file saved and see that it's in PDF format and will open with Acrobat Reader.

Silhouette Studio, PDF convert, PDF, save as PDF, Silhouette Studio Software tutorials


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I received a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

42 comments

  1. This does not work with my computer (not a Mac). I just get the normal print box like I do with any program I am printing from.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Do you need to have the Designer's Edition to do this?

    ReplyDelete
  4. I love this tutorial. Thank you. I am trying to make a mother's day print for a regular sized paper, but the print border makes my background not reach the sides of the paper after I save as a PDF. I also have my "borderless" option selected and even though my print goes to all edges of the paper, when I save as a PDF, my print has white .5" edges all around it. Any suggestions?

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. I love this tip too! Thanks for posting. I am similar to Angela above though... when I save as pdf and then open it, the image is not centered on the page anymore as it was in silhouette. Any ideas on this. I keep having to go back to my silhouette doc and manually adjust the image left, right, up, down and resaving as pdf until I find it looks centered on my pdf doc. Also wondering if you know how to save an image larger than letter size so it will show up and print on pdf. THANKS for the tip!

    ReplyDelete
  7. I too only get the normal print window. I'm using a pc and basic studio software. Can you please advise me on how to get the odd option. Thanks so much!!!

    ReplyDelete
  8. Thank you, thank you, thank you!!!

    ReplyDelete
  9. I do not have this option. I have a windows machine. Is there a way for me to print to PDF?

    ReplyDelete
    Replies
    1. I would like to know as well!

      Delete
    2. you need a print tool that prints as pdf, sorry, I am on the mac and do not know the name of the print tool

      Delete
  10. Good work. Thank you for sharing this guide about converting Silhouette Studio files to PDF.
    Best regards.
    PDF conversion

    ReplyDelete
  11. My file is bigger then the standard (11x8.5). How can I save a bigger file as a PDF without it cutting it off?

    ReplyDelete
    Replies
    1. hi - did you figure this out? I'm stuck :/

      Delete
    2. I'm also wondering this as well! Did you figure it out??

      Delete
    3. I don't believe you can - it must be within the safe print area to save as a pdf

      Delete
    4. No I never figured it out.

      Delete
  12. I keep getting black boxes on my file..... they are not on the original so I am not sure where they are coming from but when I open the pdf they are there, any ideas?

    ReplyDelete
    Replies
    1. Nikki were you using the free version and getting this result?

      Delete
  13. This comment has been removed by the author.

    ReplyDelete
  14. In most times, I just deal with PDF and Word, since the Word can directly save to PDF files, I would need to convert PDF to word sometimes, and I only use the free online tool: http://www.free-pdftoword.com/

    ReplyDelete
  15. Thai you so much! This is so easy! I was getting mad trying to do it!!

    ReplyDelete
  16. I have been using 'print -> as pdf' for tons of years! on my mac on a daily basis, w/o a plotter. (no need to write .pdf, it gets added automatically) On windows you first need a printer add-on that prints to pdf.
    For the next step just use the app preview! e.g. 'export to jpg'!
    Too bad those great features are not known more widely.

    BUT with silhouette I do have a problem: It prints the grid lines even if I put it on invisible. So I usually use to make a screen shot (shift-cmd-4) - which then is a jpg and usually sharp enough for my purposes. (and then you can use preview to 'export to pdf')
    Anybody else having a problem with the hidden grid lines?

    ReplyDelete
    Replies
    1. I just saw your post. I am having the same issues with the grid lines. If I find a solution, I will let you know.

      Delete
    2. Someone gave me this solution…And it worked great.
      https://cleversomeday.wordpress.com/2014/11/06/ssprintables/

      Delete
    3. PlaidKat, what a great solution, thanks a lot, you made my day!

      Delete
  17. I am on a Macbook Pro. When I save my file to .pdf and then open it, it shows the grid marks. I design without a grid. What do I need to do differently?

    ReplyDelete
    Replies
    1. I am having the same problem! Did you ever find a solution to the grid lines?

      Delete
  18. see above, I used the preview in Lion and it helped, but cannot find it anymore in ElCapitan. so what I do is a screenshot, and it it has the lines I move the design outside before taking the screenshot.

    ReplyDelete
    Replies
    1. last time when I checked "no grid" in silhouette it worked fine for me.

      Delete
  19. I am using the standard edition of Silhouette Studio. Does this conversion not work for this edition? Please help!!!

    Marie

    ReplyDelete
    Replies
    1. should work on any mac, no matter which silhoutte version

      Delete
  20. Wow! This was so easy. You just saved my day. Thank you!

    ReplyDelete
  21. Hello, Thank you for this great tutorial. Really makes my life so much easier. Has anyone figured out how to place oversized images so that it will come out nicely on multiple Letter-sized pages? I design quilting patterns and need to know how to do this. Thank you.

    ReplyDelete
  22. You can try http://www.pdfcoding.com/online/pdf/convert-pdf-to-tiff/ for high quality asp.net convert tiff to pdf. Even there is 10% discount on the first order.

    ReplyDelete
  23. Thank you so much for this tip!! I used Silhouette Studio to design something the way some people might use PhotoShop. I turned it into a PDF no problem, and the next step is to print it out! Thank you!

    ReplyDelete
  24. Does this only work for MAC? when I tied to do this, it did not give me the option to change to PDF it was just a normal print screen without any options. When I clicked on the link you provided for Microsoft and it did not work.

    ReplyDelete
  25. This is a GAME. CHANGER. Thank you!!

    ReplyDelete
  26. LOVE this! Thank you SO MUCH!!!

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.