Copyright Silhouette School 2016. Powered by Blogger.
www.silhouetteu.com


Which Printer Should I Get Next? Sublimation vs DTG vs White Toner Printer

One of the best things about Silhouette Studio is not only how powerful a program it is, but the fact you can export from it in various file types allowing for printing on a wide range of printers. 

silhouette 101, silhouette america blog, silhouette and sublimation, print and cut, Direct to Garment printer

When it comes to pairing a printer with Silhouette Studio or Silhouette CAMEO, print and cut is usually the first thing to come to mind. But it's only the tip of the iceberg when it comes to printing and Silhouette! 

What typically happens with Silhouette crafters is they come across a design with multiple colors or shading and they realize the amount of time and materials it will take to cut it on vinyl or HTV. That's where inkjet printable HTV comes in.  A piece of inkjet printable heat transfer or Oracal printable vinyl is placed directly into the inkjet printer and printed directly from Silhouette creating a transfer or full color decal. 

silhouette and sublimation, print and cut, Direct to Garment printer, DTG, white toner printer, home printer

Soon though crafters start to realize they are limited in one way or another with printable vinyl and HTV and they are looking for a way to create a permanent, vibrant no hand transfer on hard or soft goods using a compact at-home printer. 

Because of the familiarity with it, most crafters think the next natural step is a sublimation printer.  It's a good choice - but it's not the ONLY choice. 

Before you decide on if a sublimation printer (or some other printer is best for you) the question you really need to ask yourself is: Is my focus (whether that's for your business or your hobby) hard or soft goods? 

The answer to that question will lead you in one of three ways: Sublimation, Direct to Garment or White Toner. 

If your MAIN goal is to create custom and personalized hard goods such as mugs, luggage tags, license plates, key chains, photo boards... then a sublimation printer is the best option.  

Sublimation can do fabrics and apparel but it must be light colors and it must contain at least 65% polyester. This is why I ask what is the MAIN reason you need a printer because if the main reason is for soft goods a sublimation printer may limit you immediately. 

silhouette and sublimation, print and cut, Direct to Garment printer, DTG, sawgrass, sawgrass sublimation


If the answer to why you "need" a speciality printer is shirts, bags, hats or other soft goods, you need to ask a second question: Is light colored cotton or the ability to work with dark fabrics my main goal? 

If lighter colored cotton shirts, sweatshirts, towels, bibs, and bags are your main focus a Direct to Garment printer like the Roland BT-12 is a good at-home option at a price that's more affordable than the commercial grade DTG printers.  

silhouette and sublimation, print and cut, Direct to Garment printer, DTG, white toner printer, home printer

The Roland BT-12 price is thousands of dollars less than many commercial DTGs because it does not print white. Not having white ink keeps the price down closer to $3,500, but also means you can't print on black or dark fabrics unless the ink is darker than your fabric (like the black on red).  

Another benefit to the DTG is it includes its own finishing oven when means a heat press is not necessary and you do not need the various papers like you would with sublimation or a White Toner printer. 

The biggest drawback to the Roland BT-12 is how limiting it is - both in size (A4 or A5) and flat, light colored fabrics that are at least 50% cotton. 

silhouette and sublimation, print and cut, Direct to Garment printer, DTG, white toner printer, direct to garment

However...if you want the most flexibility, including the ability to print white so you can apply multi-color images, graphics, and designs to dark color surfaces a White Toner printer is your best option.  

silhouette and sublimation, print and cut, Direct to Garment printer, white toner, white toner printer, home printer

The UniNet iColor 560 is an at-home, compact White Toner printer with a price comparable to the Roland BT-12.  Along with printing white this printer's biggest brags include the ability to swap out toner cartridges easily and quickly which allows to to be a white toner printer (over and under print), a regular laser toner printer, and a sublimation printer all in one depending on the ink cartridges you have in the printer.  


silhouette and sublimation, print and cut, Direct to Garment printer, white toner, white toner printer, home printer

Because it uses powder toner and not 'ink' you do not need to drain the lines or perform constant maintenance on the printer. The printer includes five toner cartridges (black, white, cyan, magenta and yellow - CMYK +WH) which yield about 7,000 full print pages (compared to CMYK sublimation ink cartridges at about 300 pages).  


The sublimation toner cartridges, florescent inks, gold and silver toner are all sold separately and are not cheap. The four pack of sublimation toner cartridges is as much as a Sawgrass SG1000, however the yield of 7k prints vs 300 must be considered. 

Aside from a relative steep learning curve compared to the other printers, one of the biggest drawbacks to the Uninet iColor 560 is it's the only printer mentioned that can not be used on a MAC.  You either need to run an emulator which is not an easy setup (I tried...over about 5 hours with the help of this very helpful Youtube video ... but still never got it completely set up before I gave up) or have a PC to run it on (what I am ultimately doing). 

The great thing about all of these printers is you can do all of your designing, customizing, and creating in Silhouette Studio then export and use the SAME designs you already own or create in each and every one of the programs needed to directly print. 



silhouette and sublimation, print and cut, Direct to Garment printer, inkjet printer, white toner printer, home printer

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

6 comments

  1. Thanks for the info, Melissa. Will you eventually look into DTF printers as well?

    ReplyDelete
  2. Thank you for the overview. One of the biggest drawbacks to most of the higher level printers is the incompatibility to Mac. I have a Roland VersaCamm 300 and I had to get a Windows laptop solely to run it. Since I know relatively little about writing drivers for printers and cutters, I am hesitant to complain but it seems like Roland and other manufacturers are really missing the boat. I'm fortunate that I was able to get a Windows laptop to use with mine but when you consider the cost of these higher level printers, buying another computer is an added cost a lot of people just can't absorb. (BTW....is there a Mac driver for the DTG printer?

    ReplyDelete
    Replies
    1. The Roland BT-12 is a DTG printer and it runs on Mac. I don't disagree with you, I had to pull out my old PC to run the White Toner printer.

      Delete
  3. I have a question about using the white toner printer for sublimation. Do you feel it does as good of a job printing sublimation to put on hard surface blanks as say the Sawgrass sublimation printer? I want to be able to do cotton dark shirts and also mugs and tumblers. Would like to only invest into one printer instead of two if the quality is the same.
    Thank you,
    Denise

    ReplyDelete
    Replies
    1. Hi there! There is a transfer dedicated to hard goods for the Uninet. If you go to Swing Design https://shrsl.com/2ibee and check out the bundle called "Uninet IColor 560 White Toner Printer Business Bundle w/ Media, $1044 Software" This has a starter pack of the hard substrate transfers too.

      Delete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.