Copyright Silhouette School 2016. Powered by Blogger.


How to Print and Cut on 24" Silhouette CAMEO 4 Pro

It's possible to print and cut on the Silhouette CAMEO 4 Pro just like all other Silhouette CAMEO and Portrait machines. 

silhouette 101, silhouette america blog, CAMEO 4 pro, 24" silhouette pro, print and cut

However, there are some things to keep in mind to get the best possible and most accurate cut around your design. 

The Silhouette CAMEO 4 Pro makes it possible to print and cut larger sheets - limited only by the size of the printer you are using. This means it's possible to print on wider and longer format sticker sheets, for example, and then cut on the CAMEO Pro.  

To keep this simple for a Silhouette CAMEO 4 Pro print and cut beginner we are going to focus on printing and cutting with an 8.5" x 11" piece of sticker paper from Online LabelsI highly recommend you cut with a 12" wide cutting mat if you can. 

Silhouette Studio Setup for Print and Cut with CAMEO 4 Pro

Start in the Send panel by selecting the CAMEO 4 Pro from the machine list. 

Move to the Design area and from the Page Setup panel adjust the page settings. The machine and cutting mat should be automatically selected based on your machine selection.  Change the mat selection to "CAMEO 12 x 12".

Change the media size to "Letter (8.5" x 11")".  

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, stickers

From the Page Setup Panel check the box to Show Print Border and turn on the registration marks by clicking "M" on your keyboard or by going to the Registration Marks tab of the Page Setup Panel and selecting "On". 

Open or merge in your designs. I'm using a set of pre-designed sticker templates from Online Labels

Make sure no part of the designs is in the hashed area or outside of the safe print and cut areas. 

Print and Cut with Silhouette CAMEO Pro

When your design is set, move to the Send area. Ensure that the cut line is where you want it - in this case around just the outside of the design. 

Change the material. Since I am using Online Label's Matte Printable Sticker sheets, I am selecting Sticker Paper, White. 

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, sticker paper

Now you're ready to print. 

As always, I'm using Online Labels sticker paper. Place the sheet in your printer. From Silhouette Studio go to the File menu and click "Print". The print preview box will open.  Click "Print" to make your printer selections. 

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, stickers

CAMEO 4 Pro Setup for Print and Cut 

On the CAMEO Pro move the right roller to the 8" mark. 

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, adjust rollers

Take your printed sheet, place it on the 12" cutting mat and load it into the CAMEO Pro. The left edge of the mat should be aligned with the right gray line. 

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, sticker paper

From Silhouette Studio's Send panel click "Send". 

The machine will first look for the registration marks then begin the cutting.  Make sure you have enough light, but not shadows or a glare when you are looking for registration marks. If you have shadows or a glare, pull out the top of the CAMEO 4 Pro lid slightly. 

When the cutting is complete carefully try to lift one of the stickers to make sure you got a good cut. If you didn't, click "Send" again to cut another pass around the stickers. 

CAMEO 4 pro, 24" silhouette pro, print and cut, 24" cameo pro, stickers


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

11 comments

  1. Hi Melissa, thank you for your tutorial!
    But I have one question - why do you recommend setting the roller to the 8"-mark, instead of the 13"-mark (where it would be one the border of the cutting mat)?

    ReplyDelete
  2. So if I'm doing this correctly I should get the cuts EXACTLY where they should be on my designs? Every time I do it, It's always off by a small margin, some do it perfect others are off by a large margin, All on the same sheet. I've calibrated everything and it seems to be fine but It happened on the Cameo 4 and the Cameo 4 Pro now. Are you supposed to add an inset to the design?

    ReplyDelete
    Replies
    1. Check out this video on troublshooting: https://www.youtube.com/watch?v=6rkONiJhmts&list=PLT9hB3BOKb_iorQC7CsuuwtMsBhneX4yW&index=3&t=56s

      Delete
  3. I received my Pro today. My machine is not detecting the registration marks. I have tried everything- thinking the machine is the problem, and not me.

    ReplyDelete
    Replies
    1. Hi there! Check out this troubleshooting video on print and cut: https://www.youtube.com/watch?v=6rkONiJhmts&list=PLT9hB3BOKb_iorQC7CsuuwtMsBhneX4yW&index=3&t=56s

      Delete
  4. What's the largest size you can do for a print cut with the cameo 4 pro

    ReplyDelete
    Replies
    1. Hi there! This is only really limited by the size that you can print!

      Delete
  5. What’s the largest print and cut you are able to do with cameo pro 24 inch

    ReplyDelete
    Replies
    1. Hi there! This is only really limited by the size that you can print!

      Delete
  6. So far my mat slides in the machine. What gives? I’ve tried everything.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.