Copyright Silhouette School 2016. Powered by Blogger.


Silhouette Sketch Pens Tutorial for Beginners (V4)

If you're new to Silhouette Sketch pens this beginner tutorial will walk you through step by step on how to draw with your Silhouette cutting machine.

silhouette sketch pen, silhouette sketch pens, silhouette cameo sketch pen tutorial

It's best to think of a Silhouette sketch pen just like the auto blade or ratchet blade as far as how it will draw. Instead of cutting however, when a pen is in the carriage, the machine will sketch.


To use Silhouette Sketch pens for the first time, start in Silhouette Studio by opening your design in the Silhouette design space aka work area.  Pretty much any design that can be cut can be sketched.

To practice, find a design from your Silhouette Studio library that you want to sketch with a single color sketch pen.


With the design open, size it, and position it on the virtual cutting mat so it's in an area that will be covered by paper on your actual cutting mat.

Silhouette Sketch,  Silhouette sketch pens, Silhouette pens, silhouette cameo pens,  silhouette sketch pen,  silhouette drawing

When you're ready, click the Send button along the top to open the cut settings.

From the material list pick Cardstock or another type of paper.

In the same panel under Tool Type select "Sketch Pen." This will automatically change the Action by: "Cut", "No Cut" and "Cut Edge" to "Sketch", "No Sketch", and Sketch Edge".  Make sure "Sketch" is selected so the sketch lines are turned on which is indicated by bold red lines.

silhouette pens, cameo pen, pen silhouette, silhouette sketch pens, silhouette cameo pens

In Silhouette Studio, the design will look the same as if you were going to cut it.

Take your sketch pen and place it into the left tool carriage on your Silhouette CAMEO 3, Portrait 2 or Curio. If you have a Silhouette cutting machine with just a single carriage, place the pen in there.
Sketch pens can be used in all of the Silhouette CAMEOs, Silhouette Portraits, and Curio.

silhouette pens, cameo pen, pen silhouette, silhouette sketch pens, silhouette cameo pens, cameo 3 pens

Press the pen down so it falls completely into the carriage and then lock it into place by pressing the locking mechanism on the tool holder fully in.

silhouette pens, cameo pen, pen silhouette, silhouette sketch pens, silhouette cameo pens

Place your paper on the Silhouette cutting mat and load it into the Silhouette Cameo or other cutting machine.  Remember, to load the mat you want to gently line up the top edge of the mat next to the rollers while the left edge of the mat is lined up with the line/arrows on the left side of the front of the machine. Then press Load or Load Mat on the touch screen depending on which Silhouette machine you have.

Back in Silhouette Studio, still in the Send panel, click "Send" or "Start" and your machine will begin sketching immediately.

silhouette sketch pen, silhouette sketch pens, silhouette cameo sketch pen tutorial

If you experience any issues with your Silhouette sketch pens - such as skipping or stray lines or you want to know how to use two sketch pens in the same down - check out these Silhouette sketch pen tutorials

silhouette cameo pens, silhouette sketch pen, silhouette sketch pens, silhouette cameo sketch pen tutorial, draw silhouette cameo 3


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

8 comments

  1. Thanks for a great tutorial, I’m definitely going to be getting those fonts and it looks like it would be worth upgrading to the premium Silhouette Studio for this type of thing.
    My friend got me some of these pens for Christmas but when I try to use them they just seem to skip and not draw properly like a cheap ballpoint pen. I’m using the recommended settings for sketch pens on 160gsm paper. Any Ideas what might be causing this?

    ReplyDelete
  2. What if you want to do more than one color, how does that work if you have one cartridge?

    ReplyDelete
  3. Ok so the notes up above say to load the pens in the left cartridge for a Cameo 3, or down. What about the Cameo 4? Would I still load the pens in the left cartridge?

    ReplyDelete
    Replies
    1. Check out this blog post: https://www.silhouetteschoolblog.com/2021/01/perfect-sketch-with-sketch-pens-in.html

      Delete
  4. Can you just use the pens on paper or can they be used on different materials like burlap and fabric?

    ReplyDelete
    Replies
    1. You probably COULD but the results would probably not turn out great.

      Delete
  5. I tried to make a sympathy card. The pen would only connect with the paper on the very last part of the message. I am so frustrated with this machine right now I want to throw it out the window

    ReplyDelete
    Replies
    1. Hey there! Check out this blog post: https://www.silhouetteschoolblog.com/2021/01/perfect-sketch-with-sketch-pens-in.html

      Delete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.