Copyright Silhouette School 2016. Powered by Blogger.


Mirroring Curved Text for HTV in Silhouette Studio (The EASY 3 Step Way)

Mirror, curved text, HTV, heat transfer vinyl, Silhouette Studio
A few months ago I did a post on how to mirror curved text for HTV (this is most commonly needed for logos).  My tutorial included at least half a dozen steps.   Since then I've been asked the question repeatedly and each time instead of sending folks to the Silhouette School tutorial I explain in a matter of a sentence.  You see, I am always learning, too, and honestly the tutorial was NOT the easiest way to mirror curved text in Silhouette Studio.  But I assure you I have since learned THE easiest way and now I'm going to share it with you!


Go ahead and wrap or curve your text as you normally would. By the way, putting text on a curve is called 'Text to Path.'  If you need a refresher check out this tutorial for curving text. 

Mirror, curved text, HTV, heat transfer vinyl, Silhouette Studio

Select the text.

Right click.

Select "Convert to Path"

Mirror, curved text, HTV, heat transfer vinyl, Silhouette Studio, convert to path

Now you can delete the circle you were using to create the curved effect AND from the Replicate window you can mirror your text like you would any other image so that you can correctly cut on HTV.

Mirror, curved text, HTV, heat transfer vinyl, Silhouette Studio, mirror right

Wondering why you have to mirror designs for HTV?? Click here for a beginners tutorial on Heat Transfer Vinyl.  

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I received a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

6 comments

  1. Thanx Melissa for your help with the tutorials. I appreciate it. Hannelie

    ReplyDelete
  2. You are amazing! I am making a shirt for a pregnancy announcement... tomorrow! Haha I'm a bit of a procrastinator, but you saved me so much time! Thank you so much!

    ReplyDelete
  3. Thanks Melissa, saved me again! X

    ReplyDelete
  4. THANK YOU!!! You just saved my design!!

    ReplyDelete
  5. I can ALWAYS find answers on your website! Thank you so much for making things so quick and easy to figure out solutions when working in SS.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.