Copyright Silhouette School 2016. Powered by Blogger.


Circle Monogram Tip: Getting Two Monograms for One with Silhouette


Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial
A few weeks back I posted a quick tip on the Silhouette School Facebook page about how to get a two for one monogram.  Basically you use the positive and negative part of the cut.  I ended up getting a lot of questions about exactly how this technique works so I thought I should further explain in a full on tutorial.


This tutorial works off the tutorial I shared a few months ago about making your own circle monogram so start here.  

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial

Once you've created your monogram you're done the hard part.  If you were to cut the monogram like this it would give you a great monogram, but you'd only be able to use the actual letters...not the negative space.

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial

So to get more bang for your buck and give yourself a SECOND monogram without using any more vinyl you're going to make a few more additions to your design.  Let's just say the secrets in the circle.

The first thing you need to do is make a circle.  You want the circle to be perfect so hold down the shift key while you use the Draw a Circle tool.  More details here on drawing perfect shapes and perfectly straight lines.  Make the circle slightly bigger than your monogram.

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial, draw a circle

Now select the entire monogram and the circle and click the Align tool.  When the window opens, click the very top selection "Center". This will align the monogram exactly in the center of the circle.

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial, align tool, center
The next step is to put an offset around the circle.  Select only the circle > Offset Tool > Offset (adjust the distance of the offset whatever you'd like).

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial, offset tool

And finally you want to highlight everything - the monogram and both circles - at the same time and make them a compound path (Select Design > Right Click > Make Compound Path.) This will make sure that they become one design instead of individual pieces.

When you cut you're obviously cutting just one time.  After you weed out the vinyl (the gray area below would be the backing of my vinyl revealed after weeding) you'll be left with something that looks like this.  I've filled it in and added the green lines just so you can more easily see where the blade has cut.

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial

You won't be able to use transfer paper right away because that would pick up the entire design. So you want to treat the INSIDE (or negative space around the letters) as a sticker.  Peel it up with your finger gently.  Don't try to move the outer circle by hand, you'll never get it back in a perfect circle.  But the inside area (the left image below) is solid enough that you can move it by hand.  Once you remove it and place it on your surface, you can move any counters (the inside area of the letters like A) by hand. I 'eyeball it' to place the counters back where they below.

Now you have this...and this! And you can use transfer paper to move the more delicate monogram!

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial, negative

Here's how I used my two monograms.

Circle monogram, two, one cut, Silhouette Studio, Silhouette tutorial, Silhouette Portait

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I received a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

4 comments

  1. thank you for the notes! how would you do this if I were using HTV and wanted to be able to iron on both monograms? I don't think ill ever be able to make just one anymore! :)

    ReplyDelete
  2. What font did you use for this monogram?

    ReplyDelete
  3. Melissa, thank you so much for all your tutorials, tips, tricks, ideas, and deals you share! You are AWESOME!
    I am really trying to understand how to make these circle monograms and I have somewhat figured out how to make the type in the beginning of this tutorial, but the style that is at the end is still a mystery. Do you have a tutorial on how to make the second circle monogram?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.