Copyright Silhouette School 2016. Powered by Blogger.


{Silhouette} Vinyl Monogram Wall Art

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio
I'm just gonna put this out there - I love monograms.  Okay there I said it.  I'm a monogram-aholic.  I would monogram my forehead if I could...okay, not really.  Anyway, I had this old frame that the glass had broke and I didn't really care for the silver.  Originally I used it to make a DIY jewelry organizer for daughter, but she never used it and I thought I could put it to better use....and so I upcycled it, again!   If you have an old frame and you want to get this look check out how I accomplished it here before you move on to cutting your monogram.

Alright, let's start cutting!  This is a really simple Silhouette project that has a huge impact.  First, you want to make sure you have the font Monogram KK downloaded and installed on your computer.  If you don't, you can get it for free at Dafont.com

Now open up Silhouette Studio (you must do this after the font installs on your computer or it won't show up in SS's font list).   For a married monogram the wife's first initial is on the left, the last name is in the middle and the husband's first initial is on the right.  So go ahead and pick the font tool and Monogram KK font and type the three letters with the first and third letter being lower case and the middle (last name) initial upper case.  Monogram KK automatically sizes them for you!  So cool.


Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio

Now you're going to enlarge the entire design.  I wanted my monogram a little closer together so I ungrouped and moved the letters around slightly. 

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, ungroup

It's very helpful to reveal your cutting mat grid at this point so you can make sure the letters are lined up.

Once I had the monogram how I wanted it, I re-grouped the letters and welded them together.   Here's my lesson on welding if you need to brush up.

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, weld

Then I enlarged the entire design one last time so it filled my cutting area.

Now it's time to load the vinyl - no mat necessary which makes cutting vinyl super easy.  Send the design to the Silhouette and wait for the magic.  Full lesson on getting started with Silhouette vinyl here.

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, Silhouette Portrait

Once the monogram is cut you can remove the excess vinyl and leave only the monogram design on the backing.

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio

Then use a piece of transfer paper (did you know you can reuse it?) to move the monogram from the backing to the wall.

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, transfer paper


Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, transfer paper

Press it hard onto the wall and then starting from the corner - and using a popsicle stick or credit card as you go - smooth the vinyl down to make sure it sticks to the wall and not the transfer paper.

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio, transfer paper

Looks good, right?  But it looks even better when you frame it, don't you think?!

Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio


Vinyl, monogram, wall art, Silhouette tutorial, Silhouette Studio

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!







 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

5 comments

  1. I am so happy I found your blog. You can't imagine how much you have taught me how to use my Portrait. Now I wish I would have purchased the Cameo. Thank you so much.

    ReplyDelete
  2. I'm glad you found Sil School too Bonnie!

    ReplyDelete
  3. Can I do this with an original cricut ( 1st one made)

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.