Copyright Silhouette School 2016. Powered by Blogger.


How to Use Laser Printer Sheets for Stencils When You Have Inkjet Printer

If you got an Ikonart Stencil Kit and you now have a pack of inkjet or laser printer sheets that aren't compatible with your printer - all is not lost. 

silhouette america blog, silhouette 101, silhouette stencils, ikonart, oracal 651

If you have an inkjet printer, like I do, you can actually use the laser printer sheets that came with it to make custom reusable stencils. Read on for how to use the Ikonart Laser Sheets for stencils even if you don't have a laser printer (and same goes for inkjet!)...and how to save 15% off anything on the Ikonart site!

I am making a set of stencils so I can do some wood burning using torch paste. 

Start by opening the stencil design in Silhouette Studio. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

I am using three floral designs found in the Bundle of Bundles 5.0 on So Fontsy

Silhouette SVG, Cricut SVG, Silhouette fonts, Commercial use SVG, Silhouette cut files

Size the designs as needed and then cut with your Silhouette CAMEO or Portrait on black vinyl. It's EXTREMELY important that you only cut on black vinyl. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

When the cutting is complete, weed the designs. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

I found it easiest to reverse weed these small vinyl decals while on transfer tape. 

If you didn't reverse weed, cover the weeded vinyl decal with transfer tape and remove from the vinyl backing. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

Now grab one of the Ikonart Laser Printer sheets that's not compatible with your inkjet printer. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

Place the vinyl decals on the sheet using the transfer tape. It doesn't matter which side of the laser printer paper you put the decal on - both sides are the same. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

Use a scraper to burnish the vinyl onto the sheet. Then peel away the transfer tape. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

You are now ready to expose the stencil under the UV light. 

Place the stencil film down first with the textured side up. Place the printer sheet with the vinyl decals on top and cover with the clear cover sheet included in the Ikonart kit. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

Expose the stencil under the UV light onto a sheet of stencil film for 30 seconds. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

Wash out your stencil like you normally would and let dry before using the stencil to paint, etch, wood burning, or screen print. 

silhouette stencils, ikonart, oracal 651, adhesive vinyl, stencils

You can even remove the vinyl from the clear print sheet and use it over and over again for this same process with different designs.  

While this process definitely takes longer than simply printing directly from Silhouette Studio onto the printer sheet then exposing, this is a great way to not only use the incompatible printer sheets to make Ikonart stencils, it's also a great way to stretch your Ikonart Stencil sheets! 

Here's how my wood burned wooden spoons turned out! 

silhouette stencils, ikonart, oracal 651, wood burning, wood spoons

Don't forget if you want to grab an Ikonart Stencil Kit or pick up some accessories, you can save an extra 15% with my code SILSCHOOL. 

silhouette stencils, ikonart, coupon code, ikonart stencil kit, stencils

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

1 comment

  1. What did you treat your spoons with after burning to be food safe?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.