Copyright Silhouette School 2016. Powered by Blogger.


How to Use Torch Paste Gel: Wood Burning Stencils Tutorial

If you've never used torch paste gel to wood burn stencil designs you're about to have your mind blown!

silhouette 101, silhouette america blog, wood signs, Ikonart, heat press

I've done several wood burning with singe pen and Silhouette CAMEO tutorials in the past, but woodburning paste takes it another step further by allowing you to wood burn items that won't fit in the Silhouette CAMEO like wood canvas, frames or wood blocks. Read on for how to use torch paste gel to wood burn with stencils! 

Wood Burning with Stencils Supply List: 

Here's a list of what you'll need!
*use code SILSCHOOL to get an extra 15% Off

It all starts with creating or cutting a stencil with Silhouette CAMEO. You can use vinyl or stencil material to cut out a stencil design or you can use the Ikonart stencil making kit - which would allow you to make a reusable stencil for wood signs that you can use over and over again.  

For this project I'm going to make a set of wood ornaments. The unfinished wood blanks come in a pack of 50 from Amazon.

Last year I created a template so I could apply printable heat transfer to these wood blanks, and now I am going to use that same template to size my designs. 

The designs I'm using are part of a wood round Christmas set from the September SVG and Font Bundle on So Fontsy

Silhouette SVG, Cricut SVG, Silhouette fonts, Commercial use SVG, Silhouette cut files

If you're not familiar yet with how to make a reusable stencil with the Ikonart Stencil Kit, here's a beginner tutorial on the steps including how to print from Silhouette Studio onto the Ikonart inkjet printer sheets. 

wood signs, Ikonart, heat press, Silhouette Studio v4, stencils

Since I am making a set of wood ornaments, I cut the printed sheet apart after printing. 

wood signs, Ikonart, heat press, Silhouette Studio v4, stencils

wood signs, Ikonart, heat press, Silhouette Studio v4, stencils

Expose and then wash out the stencil.  If you need a refresher for how to make a silk screen stencil with Ikonart this beginner tutorial should help.

wood signs, Ikonart, heat press, Silhouette Studio v4, stencils

wood signs, Ikonart, heat press, Silhouette Studio v4, stencils

If you are making a vinyl stencil go ahead and cut your stencils and weed. 

How to Use Torch Paste Gel for Wood Burning with Stencils

Now you want place your stencil directly on the piece of wood. Make sure to press it down well so there are not areas where the torch paste could seep through and bleed. 

wood signs, Ikonart, heat press, Silhouette Studio v4, Silhouette stencils

Use a small silicone scraper and scrape a layer of torch paste across the entire stencil. Wipe off any excess and turn to the container. A little of this stuff goes a long way. 

wood signs, Ikonart, heat press, Silhouette Studio v4, Silhouette stencils

I like the torch paste gel because it goes on orange so you can see it, unlike the single pens which are "invisible" so you're kind of left wondering...did this work?

Leave the stencil on the piece of wood for about 2 minutes to let the torch paste gel set slightly. 

Carefully remove the stencil. 

wood signs, Ikonart, heat press, Silhouette Studio v4, Silhouette stencils

If you are using a custom reusable stencil like I am, you can wash it off and let it dry to use it again later. 

The final step is to use a heat gun to activate the torch paste gel to get the wood burning effect.  The key here is to keep the heat gun moving so you get an even wood burn and don't scorch the unfinished wood. 

wood signs, Ikonart, heat press, Silhouette Studio v4, heat gun

wood signs, Ikonart, heat press, Silhouette Studio v4, torch paste

If you don't have a heat gun, you can actually use a heat press at 400 degrees to activate the torch paste...I would suggest pressing in about 10 second clips. 

wood signs, Ikonart, heat press, Silhouette Studio v4, torch paste

Personally I prefer the heat gun because, while I takes a little longer and you can only do one at a time, you have more control. 

wood signs, Ikonart, heat press, Silhouette Studio v4, torch paste

And that's it..that's all there is to using torch paste gel with wood burning stencils!  Let your creativity run wild! 

wood signs, Ikonart, heat press, Silhouette Studio v4, torch paste


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

6 comments

  1. Love the torch paste!-I just received mine and it is so easy to use.

    ReplyDelete
  2. It would be cool to do a torch psste background with paint or vinyl over it for layered interest.

    ReplyDelete
  3. Does the stencil film have a sticky back?

    ReplyDelete
  4. Can you use this over stained wood?

    ReplyDelete
  5. So, no need to completely wipe off the torch paste before using the heat gun?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.