Copyright Silhouette School 2016. Powered by Blogger.


How to Remove a Photo Background in Silhouette Studio: Magnet Trace Tutorial

Did you ever want to remove the background from an image in Silhouette Studio? Of course you have!


There's no need to use any other software - Silhouette Studio can do it! Silhouette School contributor Elly from Silhouette Secrets is here today to explain how to do just that with the help of the Magnet Trace tool.

If you have the Silhouette Studio Designer Edition upgrade or higher to the V4 software, you have three trace options available to you - Trace, Trace by Color, and Magnet Trace. The Magnet Trace feature allows you to move around the edge of an object within a photo with your cursor and it will sort of snap to the design you are tracing. 

What would you use the Magnet Trace for in Silhouette Studio? Well, after playing around with it for a bit, I found that it worked for removing the busy background from around an object.

  silhouette studio trace, how to trace in silhouette, silhouette trace image, how to trace on silhouette cameo, silhouette trace and cut

I opened this flower photo in the Silhouette software and resized it down to fit on my design mat.

Open the Trace panel from the right sidebar and then click on the Magnet Trace tab in the Trace panel.

Hold down your mouse and start drawing around your object. Your cursor looks for similar colors and magnitizes or snaps to the edge of that color as you move the mouse.

The Magnet Trace tool default is set to 50% size and you may need to adjust the size of your tool to get the best trace. I found that by decreasing the size of my magnet trace tool, I had more control over where it snapped to.

  Silhouette Studio designer edition tutorials, Silhouette Studio Software tutorials, Silhouette Design Studio tutorials, silhouette tutorial, silhouette cameo tutorial for beginners

After you have gone all the way around the design and snap the trace line closed it will turn green indicating your cut line. If you double click the cut line you created you will see the edit points and you can make any adjustments to individual points - moving them in or out to fine tune the trace.

Now, there are two options: trace or trace and detach.

If you click on trace, it will just create a trace lines around the flower. This would work if you were printing the entire photo and wanted to cut the flower out of the photo. Or if you just wanted to use the shape of the flower to create a cut file to cut on a different material.
  Silhouette Studio Software tutorials, Silhouette Design Studio tutorials, silhouette tutorial, silhouette cameo tutorial for beginners, how to use silhouette studio

If you want to remove the traced object from the background, click on the Trace and Detach option.

This will separate the object you have traced from the background and you can move the background away and delete it.

  Silhouette Design Studio tutorials, silhouette tutorial, silhouette cameo tutorial for beginners, how to use silhouette studio, studio

Now, is it perfect - no.

After you trace and detach you'll get an even better idea if you need to make more adjustments to the edit points to clean up the edges.  Zoom in so you have easier access to your points.

  how to use silhouette studio, studio, silhouette studio, silhouettestudio, silhouette trace and cut

One thing I noticed when working with this magnet trace tool, is that it is very forgiving. Even though I have traced and detached my image, it still remembers the photo image from outside of my traced line. What does that mean? If I move an edit point out away from the flower, it will show the background that was there.

  silhouette cameo tutorial, silhouette cameo tutorial for beginners, silhouette cameo tutorial, how to trace on silhouette cameo, silhouette trace and cut

Why does that matter? If when I traced the image, I was too far inside the flower edge, I can move those edit points out and correct that. Even though I have traced and detached it from the background, that information is still there and I have more control over how I can adjust my image - this is where Magnet Trace differs from the Subtract or Crop tool.

As you can see in my photo above, there are areas that my mouse did not come close to the flower edge. By moving those edit points in and deleting some that are not needed we can make that edge much cleaner.

  how to trace in silhouette, silhouette trace image, how to trace on silhouette cameo, silhouette trace and cut, Silhouette Studio designer edition tutorials

Keep in mind, that you can manipulate multiple edit points by holding down the Shift key and drawing a box to select multiple point, then move them all as one or delete several in an area. You can also change how that edit point acts by moving the blue directional points on each edit point, changing it to a curve, smoothing it out or deleting it. 

Keep in mind when the Silhouette CAMEO machine cuts, it will be moving to each of these edit points as it cuts the design out. This is why some traced images and .dxf files sound odd cutting or take a long time to cut, because it has to hit every single edit point on the design. There is absolutely nothing wrong with the machine and it's cutting exactly as you have told it. My flower has a lot of twists and turns and it will have more edit points to achieve that look, then another design might.

Here are a few more flowers extracted with the Magnet Trace tool.

  Silhouette Studio designer edition tutorials, Silhouette Studio Software tutorials, Silhouette Design Studio tutorials, silhouette tutorial, silhouette studio trace

Now, what would I use this for? Custom print and cut stickers from photos I snapped this summer, perfect to add a bit of color to my planner.

  print and cut silhouette, silhouette cameo print and cut, print and cut silhouette cameo, print and cut files for Silhouette, print cut machine,

There really are endless possibilities that you can do with the Silhouette Studio software. This is a great option for those who do not have a photo editing program or for creating that unique project that you want to cut on your Cameo. Melissa used Magnet Trace when she was using Silhouette Studio to make mock ups while re-decorating.


Keep in mind that the Magnet Trace feature is unlocked with the Silhouette Studio Designer Edition upgrade or higher. For the other trace options in Silhouette Studio, check out these Silhouette tutorials on Trace and the Trace by Color in Silhouette Studio V4.

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

2 comments

  1. WOW, thanks great to know how to use this option.

    ReplyDelete
  2. Wow, This is the most important tutorial for graphic designer. Thanks for sharing with us.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.