Copyright Silhouette School 2016. Powered by Blogger.


Spray Paint (Adhesive) Vinyl for Custom Colors! (Silhouette Tutorial)

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colorsA few weeks ago I cut a big old white 'Welcome' vinyl decal for a door only to realize it wasn't going to work because our back door is white. DUH!  Instead of throwing out that much vinyl and instead of painting my door,  I decided to try to salvage the cut with some spray paint. Seriously I owe spray paint a lot of credit for the number of times it's saved me!

 This was a whole lot of trial and error and I really wasn't sure if it was going to work...there were several points through the process where I was sure it wasn't going to, actually.   But I can tell you it did and I'm happy to be the guinea pig - so whether you messed up and cut on the wrong color vinyl or you just need a custom color vinyl that you can't find or don't want to buy a sheet of vinyl in a color you'll only use once - spray paint to the rescue.
I cut on matte white and it covered nicely with just one coat of spray paint. I'm not sure how a dark color vinyl would cover so if you have the option and you have white on hand that would be my suggestion.

Cut the vinyl and then weed it like you normally would.

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors
Grab your spray paint and your vinyl (still on the backing) and head outside.  Spray a nice even coat all over the vinyl.  Spray the lightest coat possibly while still fully covering the vinyl.

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors

Now wait. Wait for at least 24 hours for the spray paint to dry.

When it's complete dry lay your transfer tape onto the vinyl to pick up the design.  Use the Silhouette Scraper to burnish the design onto the tape.

Here is when I thought it wasn't going to work....when I started to peel the tape away from the backing all of the spray paint, even that on the backing came with it.


Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors

You may have to encourage the vinyl to come off the backing in some areas because the paint has dried over the edges of the vinyl onto the backing so it doesn't lift quite as easily.

With this big blue blob on my transfer tape, I placed it on the door.   And at this point I was just praying the blue excess paint didn't somehow stain my white door blue. Wouldn't have wanted to explain that one to the hubs...

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors

And much to my surprise the tape and all the excess paint peeled away easily while the spray painted vinyl stayed just where I wanted it on the door.

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors
There are a few little areas of paint chips on the edges (ie around the bottom swoosh on the W), but you can just use your finger to kind of flick them away to get that nice clean edge.

Silhouette, Silhouette tutorial, spray paint vinyl, vinyl, custom colors

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 
 
Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!
Pin It!

 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.

11 comments

  1. You know what I love? Well, besides all the cool and informative things you put on Silhouette School? That you tell us when you cut a white piece of vinyl for a white door! Sometimes I feel like I'm the only one who does those things. Disappointment galore a couple weeks ago when I weeded the wrong part of the vinyl!! Ugh. But that piece is safe and sound for another sign. :-) Thanks for your blog.

    ReplyDelete
  2. This is so awesome!
    I look forward to each days post on Silhouette School Blog. You guys are so smart and you are for real. I do dumb stuff all the time and when you show your mistakes and how to fix them it really makes me feel so mush better. Plus, its always such a great idea. I would have never thought to paint the vinyl. I would have been scared that all that paint would have stuck on the door. Then I would have had to repaint my whole door again. Such a great idea. I think I'll have to remember this next time I need a special color they don't make. Thanks again! Keep up the good work. We all love you crafty people there. <3
    Thanks again.
    Kathy

    ReplyDelete
  3. I used this same concept back in June of thisyear. Our VBS sign needed a time change, but my church didn't want to pay to replace 9 characters (you wouldn't believe the quoted price). I used contact paper & a twee bit of rubber cement to adhere the numbers/symbols to the vinyl banner. I spray painted it dark purple using a Krylon plastic paint. It wasn't an exact match, but very close. Now, I don't buy colored vinyl. I make my own. Trying the metallic paint for a wall monogram for my daughter next. Cross your fingers!

    ReplyDelete
  4. I am a vinyl newbie. I have been trying to make subway type art. I can never do different colors because I can't line the design up correctly. Some phrases are always just a wee bit crooked. This gives me the idea to do it all in white, therefore keeping design together and then spray painting certain phrases. Yay! Can't wait to try it on my next project.

    ReplyDelete
  5. if you spray painted it BEFORE you weeded it, wait for it to dry and then weeded away the overspray, only be on the letters would be colored right? then apply the transfer tape and apply. Just a thought, I haven't tried that but it makes sense in my mind - lol

    ReplyDelete
  6. I've spray painted sheets of vinyl before that I didn't really like or if I needed a custom color. then waited for it to dry and then cut that in the machine and it's always worked great. thanks for the reminder that this is a possibility!

    ReplyDelete
  7. Would it be easier to spray the vinyl first then cut out with Silhouette when properly dry ?

    ReplyDelete
  8. Replies
    1. i think it would depend on how much use the letters get. i put lettering on my storm door for every occasion, even in the dead of winter. it does fine through rain, snow, freezing temperatures. i also made labels for my canisters and my grand children's art supply and toy totes and they've held up great. i have also made exterior signs using contact paper for stencils and the paint doesn't hold up as well as the spray painted contact paper.

      Delete
  9. i paint contact paper all the time! i did a great design last fall-- i put it on the glass of my storm door-- and sprayed the lettering and the leaves both school bus yellow and rusty orange. the over spray made them look shaded-- and custom. got tons of nice comments. i've also found if you have ragged edges, run a tooth pick around the edge and it comes right off for a clean look. i pick up basic paint colors at walmart (they have the best prices) and lowe's valspar brand for the great designer shades. i keep them in a clear tote to see the cap colors at a glance. metallic paints make great labels, too. hope this helps someone else.

    ReplyDelete
  10. Awesome idea! I wonder if this would work with acrylic paint? Has anyone tried it?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.