If you've ever wondered if you could create custom UV ink modes in xTool Studio..the answer is not officially. But it is possible with a quick workaround.
Every design on your Omni UV printer flatbed can have its own ink mode, which means you can stack layers - each with its own settings - to create your own custom UV ink mode.
The ink mode tells the UV printer what to lay down and in what order. Color only is perfect on white or light blanks, because the blank itself acts as your white.
On clear or dark blanks, you need white ink so your colors actually show up. White + Color prints white first and color on top, which is what you want when you're looking at the printed side. Color + White flips that order, and that's the one you use when you're printing on the back of clear acrylic and viewing it through the front.
If that flip makes your brain hurt a little, I explain it more in my reflect vs mirror printing in xTool Studio post.
But what happens if you need an ink mode or order that doesn't exist as an option? For example I have found that when printing gloss varnish using the Flat Raised: White > Color > Varnish option works well to avoid bubbles..but adding an EXTRA layer or two of varnish is high gloss bubble free perfection.
Because the flat raised ink mode doesn't let you adjust the number of layers for each type of ink, you need to stack layers to accomplish this.
How to mix ink modes in one print job
Start in UV flatbed mode and scan your bed so you can see exactly where each blank is sitting. I'm printing on ceramic tiles. Ceramic and other porous materials are notoriously difficult to get a smooth gloss varnish on because air can get trapped between the layers.
Import your image like you normally would. Here I'm printing Spanish tile style ceramic holiday coasters.
Size the image to fit over your blank in the work area (you can also use smart mask for perfect alignment).
Select this layer and from the ink mode options pick Flat Raised > White + Color + Varnish (Gloss). A pop up will come up, but you can ignore it because there's nowhere to adjust settings in this flat raised mode.
Now select the image and duplicate it in the work area. The duplicate will be on top.
With JUST the duplicate selected change the ink mode settings on this layer only to Varnish (Glossy) and change the number of layers to 2.
What you've done is created your own ink mode using layers which you can see towards the bottom right of the screen.
Now here's where it gets tricky
Mixing ink modes in a stacked design that's only seen from the top like on this coaster is the easy part.
But stacking two DIFFERENT ink modes and two different images is a totally different story.
That's what you need if you want a different design on the front and back of clear acrylic or glass, with no mirrored text on either side. Think a team logo you see from the front and each player's name on the back of the same ornament.
To pull that off, the white has to end up sandwiched in the MIDDLE, with color on both outside layers. That means two layers with opposite ink orders, printed in exact alignment on the same blank. If your placement is even slightly off, or your layers aren't grouped the right way, the preview looks completely wrong and you'll have no idea why.
I walk through the whole setup in Homework 50.2 on Silhouette U. That includes building a placement mask so every design lands perfectly on its blank, the exact ink order for each layer, and the grouping mistake that makes your preview lie to you.
It's part of a three part homework series. Part 1 covers cutting the custom acrylic blanks on your laser, Part 2 is the double sided setup, and Part 3 adds a different name and number to every single piece in bulk, then sends the whole batch to print.
And if you're tired of piecing this stuff together from random videos, Silhouette U is where I put all of it, in order, with me answering your questions when you get stuck. Join Silhouette U here.
Don't have a UV printer yet? This is the xTool Omni I used for these.













.png)




No comments
Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.
In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.