Copyright Silhouette School 2016. Powered by Blogger.


How to Sublimate on Canvas Panels

If you're wondering "Can I sublimate on canvas?" the answer is yes! 

silhouette 101, silhouette america blog, sublimation, silhouette and sublimation, heat press

Knowing how to sublimate on canvas panels will give you options when you don't want to paint, vinyl or use HTV. Read on for how sublimate on stretched canvas to make a reverse canvas sign! 

Start by removing the canvas from the frame. I use a knife or Xacto to cut outside of the staples on the back of the frame. 

sublimation, silhouette and sublimation, heat press, reverse canvas, sublimation printing

Once the canvas is off the wood frame - press it in your heat press to flatten it out completely. You can do this while your press is still warming up to 400 degrees.

sublimation, silhouette and sublimation, heat press, reverse canvas, sublimation printing

Take a thermal laminator sheet and cut it in half. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

Then use the heat press to press it - with the shiny side up - onto the front of the canvas.  

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

You don't need to cover it while you press, although you can. Just make sure it's pressed on well without any wrinkles.

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

Print out your sublimation print on a sublimation printer. I'm using this full color designs from So Fontsy's December bundle...but you could also print a photo or any other full color image! Just make sure it prints in reverse. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

Lay the print face down onto the laminated-canvas. Cover with a teflon sheet and press with a heat press at 400 degrees at 60 seconds. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

When the time is up remove the printed sheet. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

To make the reverse canvas, use a hot glue gun along all four sides of the wood frame and press it directly onto the front of the canvas. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

Use scissors to trim off the excess canvas so it's not hanging over the frame.

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

That's it! You're done. 

sublimation, silhouette and sublimation, heat press, reverse canvas, laminator sheets

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

4 comments

  1. Thanks for this! What time & temp do you recommend for the laminated sheet to the canvas?

    ReplyDelete
  2. Can you sublimate directly to the canvas without the laminating sheet? I'd like to understand what the laminating sheet does.

    ReplyDelete
  3. The laminate has the poly properties needed for sublimation. Instead of the lamination you could also purchase 100% polyester fabric at Hobby Lobby or JoAnnes, found on the gigantic rolls for home decor projects. It looks like canvas but actually is 100% polyester. I use an off white color so my designs show true. The sublimation on this material works really well for making tote bags, pillows, ornaments, hat patches, the list goes on.
    If you don't sew you can buy an existing bag or pillow and for that matter a blank canvas, sublimate on the piece of fabric you purchased, fray the ends and use fabric glue to adhere to the purchased pillow or bag.
    When it comes to sublimation you can really expand your projects by using 100% poly white fabric.
    Temp I use is 385-400 deg for 60 seconds.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.