Copyright Silhouette School 2016. Powered by Blogger.


Sublimation Spray for Cotton: Review

Does sublimation spray for cotton really work? I was curious so I picked up a bottle to test and review...and, of course, report back! 

silhouette 101, silhouette america blog, sublimation printer, sublimation and silhouette, sublimation

Sublimation requires at least 65% polyester, but this sublimation spray for 100% cotton claims it will allow you to get the permanency, vibrant colors, and no-hand feel of sublimation even on a shirt or garment that has 0% polyester. 
The sublimation spray I picked up from Amazon didn't include any directions. Not off to a good start.  

Even if the bottle of spray is only a few dollars, I'm not sure most people are a fan of sacrificing a few shirts to get the technique down, right? 

The only information I could find about it was in the Amazon reviews so I used that info and then did my own testing from there. 

Here's how I set this test up: 

Sublimation Spray for 100% Cotton Review

I printed 6 of the exact same design on a single sheet and grabbed a 100% white cotton towel. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, sublimation spray for cottons

I then divided the towel into 2 columns and 3 rows.  One column (half the towel) was pressed at 365 degrees and 40 seconds as suggested in the comments on Amazon.  The other column was pressed at 400 degrees for 60 seconds like traditional sublimation. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, sublimation spray for cottons

Each row was also different: 
  • 1 coating of sublimation spray
  • 2 coatings of sublimation spray 
  • no sublimation spray  

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, sublimation spray review

To make sure I was covering the full area and not getting any over spray I used a paper template....and kept track of everything on this very official piece of scrap paper. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, sublimation spray review

And to make sure that each column was only pressed for the right amount of time and the right testing temperature I only pressed half the towel in two individual presses. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, heat press

By the time all six designs were pressed I had testing samples for:
  • 365 degrees @ 40 seconds with 1 coat of sublimation spray
  • 365 degrees @ 40 seconds with 2 coat of sublimation spray
  • 365 degrees @ 40 seconds with no sublimation spray
  • 400 degrees @ 60 seconds with 1 coat of sublimation spray
  • 400 degrees @ 60 seconds with 2 coat of sublimation spray
  • 400 degrees @ 60 seconds with no sublimation spray
sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, heat press

It's easy to see that the two images in the bottom row, where there is no sublimation spray, were not nearly as vibrant. However, the temperature and number of cotton sublimation spray coats didn't seem to make a big difference, but the real test will be after the towel is washed and dried..and specifically repeatedly. 

How Does Sublimation Coating Spray Hold Up in the Laundry?

After the first round through the washer and dryer it was clear the sublimation spray was definitely better than attempting to sublimate onto 100% cotton without it.  Remember the bottom row is the set without any sublimation spray. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, heat press

The middle row was the set that had two coats of sublimation spray.  Looks like the 365 degree version remained more vibrant than the 400 degree test. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, heat press

And I would have to say that that the double coating has a slight advantage over the single coating (top row). This means the double coating at 365 degrees for 40 seconds seems to give the best results after a single wash and dry. 

sublimation printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, heat press

I'll continue to launder this test towel to see if the colors fade any further. 

While the sublimation coating spray for cotton does a decent job on a 100% cotton substrate, I don't think there's any argument it's not the same quality as sublimating on garments with at least 65% polyester. 

While sublimation is amazing for hard goods it has limitations for textiles specifically that they need to be light colored and contain a high percent polyester. For that reason if you are considering adding sublimation to your small business, as an alternative to heat transfer vinyl, there are other types of printers that are more suited for bright, vibrant, multi color designs on cotton and darks that I would suggest you consider instead. 

DTG printer, sublimation and silhouette, sublimation, sawgrass sublimation printer, speciality printers

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

10 comments

  1. The sub-on-cotton spray I used looked great-- until it was washed. It was nothing but a gray blob after 4 washes.

    ReplyDelete
  2. Did you have to let the spray dry for a certain amount of time or use it while still wet?

    ReplyDelete
    Replies
    1. Check out this video where we learn how to use it! https://fb.watch/v/1ZOKppQdq/

      Delete
  3. Where can you buy this coating spray?

    ReplyDelete
  4. Hi! Thank you for this review! Would it be possible for you to give an update after a few wash? Thank you!!

    ReplyDelete
    Replies
    1. Hey there! Check this blog post out: https://www.silhouetteschoolblog.com/2021/07/sublimation-spray-for-cotton-review.html

      Delete
  5. In your review, you mentioned you had washed it once to see if it faded. Did you happen to wash it again after the review? Wondering if it remained like that or did it fade further? Also, when you spray it, does it leave any type of residue around it that you can see or feel? I don't mind a faded look on my cotton towels but don't think I would like it if it looked like I could still see the spray. Thank you!!

    ReplyDelete
  6. can you tell us paper type used, ink, and printer? thank you!

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.