Copyright Silhouette School 2016. Powered by Blogger.


How to Make a Stencil with Silhouette CAMEO or Portrait

I get a lot of questions about how to create a stencil with Silhouette CAMEO. It's pretty easy to do - as long as you understand where to weed.
silhouette 101, silhouette america blog, stencils, silhouette stencils, vinyl


Single use stencils can be made using stencil material or adhesive vinyl.

For this tutorial we will be making a stencil to be used on chalkboard vinyl with a chalkboard marker. But you could also use this same stencil to paint.

Creating A Chalkboard Stencil

To create a stencil for your chalkboard sign, open the design in Silhouette Studio and draw a box around it making sure the box is an inch away from the design on all sides. The box will be the edge of your stencil and that extra inch will serve to protect your surface from paint or chalkboard marker!

Cut your design into stencil material like Oramask 813.

One of the keys to cutting a perfect stencil is to make sure the stencil material lays flat against its backing and lays flat on your cutting mat. So, use a brayer or scraping tool to smooth out the stencil material, making sure there aren’t any bubbles in it.

stencils, silhouette stencils, vinyl, Oramask 813, chalkboard stencil

Best Silhouette Cut Settings for Oramask 813  Stencil Material

Next, load your Silhouette machine and send to cut. Test cutting is always recommended before starting any project, and I found the follow Silhouette cut settings work perfect on Oramask 813.
Blade: 2
Force: 5
Speed: 7
Passes: 1

Also, test weed the stencil before unloading your mat from the Cameo. This way you can really check to see that you achieved a nice cut and that weeding will be a breeze.

stencils, silhouette stencils, vinyl, Oramask 813, chalkboard stencil

Next, you want to weed two places: 1) the area OUTSIDE the box and 2) weed out the design from the stencil material exposing the areas where you want to paint or use the chalk marker. Because this is a stencil, not a decal, remove the design itself and not the excess vinyl around it.

If any stencil material pulls away from the backing, it may cause bubbling under the stencil material. Just smooth it out again with your finger or a scraping tool to push out the bubbles.

stencils, silhouette stencils, vinyl, Oramask 813, chalkboard stencil

Apply transfer tape over the stencil. Use your scraping tool to press the transfer tape as smooth as possible over the stencil – trying to avoid any bubbles or wrinkles in the transfer tape and stencil material. Burnish the transfer tape really well onto the stencil.

stencils, silhouette stencils, transfer tape, Oramask 813, chalkboard stencil

 Next, flip over the entire thing and roll the stencil backing off the stencil material.

stencils, silhouette stencils, transfer tape, Oramask 813, chalkboard stencil

With the stencil backing removed, use your scraping tool to press the stencil smoothly onto the chalkboard vinyl. By the way, if you don't have chalkboard vinyl you can make your own as explained in this DIY chalkboard vinyl tutorial.

Next, remove the transfer tape by rolling it back on itself.

stencils, silhouette stencils, transfer tape, Oramask 813, chalkboard stencil

Fill in the stencil with a chalk marker, like this Marvy Uchida Bistro Chalk Marker. You may need to apply the marker in layers to get even and solid coverage. These markers are available in so many different colors so you can really have a lot of fun coloring in your stencil.

stencils, chalk markers, transfer tape, Oramask 813, chalkboard stencil

Once the stencil is completely filled in and dry, begin removing the stencil by peeling up one of the edges.

You may need to use a pair of tweezers to lift the stencil edge and pick up parts of the stencil from the chalkboard. Just be careful not to press down too firmly with the tweezers or you could scratch the chalkboard finish on the vinyl. Also, try not to touch any part of the chalked areas because you could smear the design.

stencils, chalk markers, transfer tape, Oramask 813, chalkboard stencil

Since chalk markers are water soluble, when you're ready for a change, simply use a damp cloth to wipe away the design.

stencils, chalk markers, transfer tape, Oramask 813, chalkboard stencil

So, while your sign is on display, it may be a good idea to keep it in a dry area where it won't get wet. But, if you did want to make this chalk design permanent, just spray it with a few light coats of a clear matte spray to seal in the design.

stencils, chalk markers, transfer tape, Oramask 813, chalkboard stencil

You'll find the design used in this project in the Big SVG Sign Bundle at So Fontsy. There are 61 SVG designs and 4 mock ups in this bundle, plus the So Fontsy Standard Commercial Use License. Check it out!

Silhouette SVG, Cricut SVG, Commercial use SVG, Silhouette cut files, Cricut Cut Files

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

3 comments

  1. What brand is the transfer tape?

    ReplyDelete
  2. Great share. Any good alternative of Oramask 813?

    ReplyDelete
    Replies
    1. Hey there! You could try removable vinyl as well, but I really recommend the Oramask.

      Delete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.