Copyright Silhouette School 2016. Powered by Blogger.


Silhouette Studio and Graphtec CE Lite 50 Set Up for Beginners Tutorial

Setting up a 20" Graphtec CE Lite 50 to run on Silhouette Studio is a fast and easy process..and the best part is you can cut all of the designs you already own!

silhouette 101, silhouette america blog, Graphtec 20", Graphtec vs Silhouette CAMEO, Graphtec cutter

This beginner tutorial will walk you through the set up process.

Silhouette Studio Software for Graphtec CE Lite

With the release of Silhouette Studio V4.3 came the option and ability to cut directly to Graphtec CE Lite - a 20" cutting machine that's 7x faster than the CAMEO 3 and 4x faster than the CAMEO 4.

To download the Silhouette software for the first time, or update your version of Silhouette Studio, go to the Silhouette America software page. You must download V4.3.254 or later and then install it on your computer to have CE Lite cutting abilities. This same software will also run all of the Silhouette cutting machines.

Graphtec 20", Graphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO Pro

The basic free version of the Silhouette software will work to operate the CE Lite, but if you want a one time paid upgrade to unlock additional features, like open SVGs, you can purchase an upgrade.

The lowest price Silhouette Studio software upgrades are typically found at Swing Design - they also come with a free digital guide to help you learn how to use the features.


Once the software is downloaded and installed on your computer you will not see the CE Lite options until you plug in and power on the 20" Graphtec machine.

Setting Up Graphtec CE Lite to Connect to Silhouette Studio

Start by connecting and powering on the Graphtec machine and connecting it, by USB, to the computer.

Graphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO Pro, Graphtec CE Lite Review

Once you do this you should see it in your Silhouette Studio software both on the Page Setup Panel and in the Send Panel.

Graphtec 20", Graphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO Pro

Before your machine and software can fully communicate, there's one menu option you need to change on the Graphtec from the machine's touch panel.

Graphtec 20", Graphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO Pro

Go to the Menu then click "Interface" then "GP-GL".  You can then back out of the menu by clicking "X" and return to the home screen of the touch panel.

Graphtec 20", Graphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO ProGraphtec vs Silhouette CAMEO, Graphtec cutter, vinyl cutting machine, Silhouette CAMEO Pro, Graphtec CE Lite Review

That's all there is to setting up the Graphtec CE Lite 50 to cut with Silhouette Studio.  I'll be sharing a first cut to Graphtec CE Lite from Silhouette Studio tutorial very soon!!

Remember, all of the Silhouette School software tutorials now apply to Graphtec CE Lite so you can take advantage of our more than 2000 free Silhouette tutorials! 

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!


Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.


www.silhouetteu.com

4 comments

  1. من المهم جداً معالجة التسرب المائي لأنّه يتسبب في ضعف وتَفتت الباطون ممّا يؤدي إلى انهياره، وتآكل الحديد أو أي هيكلٍ معدني، ويسبب أيضاً انفصال الجدران عن البناء، وتشويه المنظر العام بظهور البقع الصفراء على السطح الخارجي، ونمو البكتيريا والطحالب، وتلف البلاط بانفصاله عن الأرضيات، وتلف وتشويه الدّهان والطّلاء الدّاخلي للجدار، وبعد التّعرف على سلبيات التّسرب المائي سنجد أن أكثر الأماكن التي تعاني من هذه المشكلة هي الحمامات.

    شركة عزل خزانات برماح
    شركة عزل خزانات بالزلفي
    شركة عزل خزانات بالجوف
    شركة عزل خزانات بصبيا

    ReplyDelete
  2. The cutter switches to Pen although I have blade selected in the silhouette studio software as well as the cutter. Have you seen this issue?

    ReplyDelete
    Replies
    1. I've had this exact same issue. I've even manually changed it on the machine to the blade and the software switches it back to pen. I couldn't figure out why I couldn't cut something as thin as paper and realized that's what was going on.

      Delete
  3. With Silhouette studio 4.4.464 when using CE Lite they will cut twice size from design. Anyone who can solve this problem, please share the solution.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.