Copyright Silhouette School 2016. Powered by Blogger.


Heat Press Teflon Sheet Hack: It's All About the Magnets!

I'm so excited for today's tutorial - it's one of those ones that will have you saying "Why didn't I think of that?" At least that's what I said when I saw this genius heat press hack in the background of a photo Silhouette School contributors Becky and Glenna of My Paper Craze sent me awhile back. 

Silhouette, Silhouette Cameo, Cricut, heat press

This little Heat Press Teflon trick is so good I asked the lovely ladies to do a whole blog post on it to share with all of you!  Plus I know how you all feel about heat presses...you have burning questions (all answers on which one I have, where to get it and how to use it can be found here). So here's a quick answer to one more...from Becky and Glenna. 
We're always looking for short cuts on crafting.  One of the headaches during heating is that darn teflon sheet for the heat press, putting it on top of your shirt each and every time you press - half the time we don't know where it is.  Or you're halfway through the press, you realize you forgot the teflon sheet altogether. Well not anymore, because we have a quick and easy cheat for you to save you the hassle!

Basically, the concept is to attach your teflon sheet to your heat press using heavy duty magnets.  The key here is to make sure you have strong magnets, otherwise they will slide off the side of your heat press.  The benefit of having it attached to the top plate is that you don't have to go through the extra step of sliding it on top of your shirt (or other item) AND you don't run the risk of forgetting it altogether.  Let me show you how I attached my teflon sheet and hopefully it will help you along the way!

First and foremost, MAKE SURE YOUR HEAT PRESS IS TURNED OFF AND COOL TO THE TOUCH. Please remember this. I have scorched a few fingers trying to adjust the magnets while my heat press is on and they conduct heat just fine! Heat press is hot, the magnets are hot.

Simply align the teflon sheet with the back of your heat press plates. †You don't really need the teflon sheet sticking out, I didn't put any magnets on the back side of mine in lue of having more sheet on the front to wrap around and attach the sheet on top (you'll see what I mean further on). Try to make sure you have an equal amount on each side, too.
Silhouette, Silhouette Cameo, Cricut, heat press

Now close your heat press and lock it into place.

Silhouette, Silhouette Cameo, Cricut, heat press

With magnets in hand, wrap the front of the teflon sheet around the front of the machine, then secure with magnets.  I used four and spaced evenly.

Silhouette, Silhouette Cameo, Cricut, heat press

Proceed to do the same thing with each side. You'll have to wrap the corners around a little like wrapping a present.

Silhouette, Silhouette Cameo, Cricut, heat press

Once you do each side, you can open your lid and the teflon sheet should stay in place! After time you might notice the magnets slide a little (remember to wait for it to cool down before you touch them to move them back!), but it's still way easier than placing and removing the teflon sheet each time you press a shirt!

Silhouette, Silhouette Cameo, Cricut, heat press

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!
Pin It!

 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.

www.silhouetteschoolebook.com

15 comments

  1. BRILLIANT! I can't wait to do this to mine. Thank you all.

    ReplyDelete
  2. Perfect timing! I just ordered a heat press over the week-end!

    ReplyDelete
  3. Awesome!!!! No more forgetting the Teflon sheet

    ReplyDelete
  4. Is keeping the sheet heated a good idea? Since it's pretty much attached now to the lid, doesn't it always stay heated (when on)? Long term would there be any issues to the sheet?

    ReplyDelete
  5. Excellent idea! I'm looking to buy a heat press and hope you can help with a question about size. I sometimes make mats and need to heat the whole 14 x 18 area of the mat. A 16 x 20 press would be ideal, but I'm really budget constrained. Do you think I could get by using a 15 x 15 and press each end of the mat seperately? Any downside/risk by doing this?

    ReplyDelete
  6. Where did you get your teflon sheet from?
    Thanks

    ReplyDelete
  7. I have the same question as Dana
    Is keeping the sheet heated a good idea? Since it's pretty much attached now to the lid, doesn't it always stay heated (when on)? Long term would there be any issues to the sheet?

    ReplyDelete
  8. Same question, Where did you get your Teflon sheet and would that make you have to replace your sheet more often?

    ReplyDelete
  9. Where did you purchase your magnets from? Any recommendations?

    ReplyDelete
    Replies
    1. You can purchase rare earth magnets from eBay. I would recommend 1/4" to a hal inch size. These are super strong magnets.

      Delete
  10. Wondering the same, about the magnets? any links???

    ReplyDelete
  11. where do you get your Teflon sheets?

    ReplyDelete
  12. Just don't use rare earth magnets. If heated above 172F,they lose their magnetic properties permanently. You'll want to use the old school black, weaker magnets for this.

    ReplyDelete
  13. Not sure if it is same for everyone but I am unable to view any if the images in this blog. Will see if any of the other articles work for me. Really wanted to see the Teflon attached.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.