Copyright Silhouette School 2016. Powered by Blogger.


Adding a Watermark to Silhouette Studio Mockups

Watermark, Silhouette Studio, mock-ups
If you use your Silhouette to create items that you sell, chances are you've needed to make a mockup for a client at one time or another.

It's best to add a watermark to mockups to protect yourself and your business - you don't want the client taking the design elsewhere to have it created or have a rough draft of a printable printed before fully paying (you are asking for at least a partial deposit up front, right?).
   
It takes just a few minutes to make the initial watermark, and after that you can save it to your Silhouette Studio library so it will be just a single click any time you want to add it.
*If you'd rather watch than read, following the written instructions, you'll find a Silhouette YouTube tutorial for adding a watermark. 
 Of course the first thing you need is a logo...and it needs to be in Silhouette Studio. There are two ways to go about this:
  1. Design the logo in Silhouette Studio
  2. Import the logo to Silhouette Studio and trace it
 If you don't have an official logo you can simply use the name of your business.  Instead of a design, you'd follow the same steps with text.

Watermark, Silhouette Studio, mock-ups

Once the logo design is in Silhouette Studio you want to change both the line color and the fill color to white.  Do this by selecting the design and then clicking on the Line Color tool > white.  Repeat with the Fill Color tool.
TIP: Move the logo to the gray area of the work area so you can actually see what you're doing..the white background of the virtual mat will make it difficult to see what you're doing.
Watermark, Silhouette Studio, mock-ups, line color tool

Now select the design again and go back to the Fill Color tool.  This time click Advanced Options.

Slide the transparency bar over to the right.  Usually between 70-80% works well.

Watermark, Silhouette Studio, mock-ups, transparency bar

Repeat with the Line tool to change the line transparency to the same percentage.

Now open up the design in which you want to add the watermark.   If the watermark is "behind" the design, click the watermark > right click > bring to front.

Watermark, Silhouette Studio, mock-ups, bring to front

And there you have it! You've added a watermark to your Silhouette Studio designs.  To send as a mock up you can export as a PDF or use the Grab tool on a MAC or Snip It tool on Windows.

Watermark, Silhouette Studio, mock-ups

The final step would be to save the watermark to your Silhouette Studio library so you can access it anytime you need to add a watermark to a design.



Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!
Pin It!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

Get Silhouette School Tutorials
Delivered to Your Email:

5 comments

  1. Love this! I designed a logo in Studio and then went to export it to use in different places. It exports with a white background. I would prefer a transparent one. Do you know how to do that or can you point me to some tutorials? I've been trying to make it happen in inkscape, but not having a lot of luck once I save it out. Thanks!

    ReplyDelete
  2. Love this! I designed a logo in Studio and then went to export it to use in different places. It exports with a white background. I would prefer a transparent one. Do you know how to do that or can you point me to some tutorials? I've been trying to make it happen in inkscape, but not having a lot of luck once I save it out. Thanks!

    ReplyDelete
  3. Thank you so much for all of your tutorials, they have helped me so much! I especially appreciated this post. However, once I attached my watermark to my picture in Silhouette, how do I save it in a format that I can post it on Facebook?

    ReplyDelete
    Replies
    1. "To send as a mock up you can export as a PDF or use the Grab tool on a MAC or Snip It tool on Windows." The Snip it tool lets you save the image as a PNG or JPG file that you can post on facebook or share in other ways.

      Delete
  4. I created the watermark as instructed above. Is there now a way to get it on my phone to add to photos taken with my iphone?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.