Copyright Silhouette School 2016. Powered by Blogger.


5 Minute Custom Coasters: Silhouette Tutorial

Silhouette tutorial, custom coasters, DIY, do it yourself
Looking for a quick, easy, inexpensive and custom gift?  I have the perfect idea for you today: custom coasters!  Seriously these took me like 5 minutes to make...

First, you need to get yourself some blank coasters.   I got these clear 3.5" square inch acrylic coasters from Punch Place Plus. They come in a pack of four with the 16 rubber bumpers for...wait for it: $4.49.  You can find them by clicking the "Acrylic, Plastic, Glass, Metal Blanks section on the left sidebar of PPP or by searching "Acrylic Coasters" in the search bar here.

In Silhouette Studio you can create whatever type of design you want. I have a thing for monograms and gold right now so I went in that direction.  I simply typed out a capital V and then copy and pasted it four times. I then selected each V individually and changed the font until I found four V's I liked.


If you want to ensure you don't make your design too large or too small create a quick mockup. Use the Draw a Box tool to draw out a box that's 3.5 x 3.5" and place your coaster design in the middle and then adjust the sizing of the design if necessary.  (Just be sure to delete the squares before you cut the design.)

Silhouette tutorial, custom coasters, DIY, do it yourself, Silhouette Studio, draw a box

When you're ready, cut out the design.  I cut on glitter gold vinyl...it's my all time favorite adhesive vinyl and I use it whenever I can!

While it's cutting, remove the protective sheets from each side of the coaster. 

Silhouette tutorial, custom coasters, DIY, do it yourself
Weed and then you're ready to transfer the designs onto the coasters.

You can use the hinge method to apply the vinyl designs if you'd like or you can use this little cheat..I won't guarantee your design will exactly centered like it would be with the hinge method, but it will be pretty darn close.

Grab your Silhouette cutting mat and put the blue cover sheet on it.  Now flip it over so you can see the grid lines (and all the dirt).  Place the coaster on the back of the mat lining it up with grid lines. The placement of the grid lines should give you a good idea where the center is!

Silhouette tutorial, custom coasters, DIY, do it yourself, cutting mat

Use clear transfer tape or transfer paper to put the design onto the coaster.  Peel back the transfer material and you're done! Repeat with the remaining coasters.

Add four rubber feet to the bottom and wam bam thank you ma'am you're all done!

Silhouette tutorial, custom coasters, DIY, do it yourself
The Ultimate Silhouette Guide, cutting vinyl, weeding, hinge method, mock-ups

For more on techniques found in this tutorial, refer to the following pages in 
The Ultimate Silhouette Guide:

Page 72 - Cutting Vinyl
Page 77  - Weeding
Page 78 - Hinge Method
Page 44 -Mockups


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


Pin It!

 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

Get Silhouette School Tutorials
Delivered to Your Email:

7 comments

  1. Are you reversing the V for the cut and then putting it on the bottom so it's not getting exposed to the condensation?

    ReplyDelete
  2. You have to reverse the letter don't you?

    ReplyDelete
    Replies
    1. I have a cricut and I don't have to turn them but maybe with Silloutte(sp) you have to?

      Delete
  3. Il ne faut pas inverser les lettres, car ce n'est pas un transfert à chaud

    ReplyDelete
  4. I love this idea I want to get some to go with my Christmas theme, but not sure I want to do gold deer, or white Christmas trees////Decisions. love the idea.

    ReplyDelete
  5. Just went to get them and they are sold out, darn.

    ReplyDelete
  6. What font is the V that has the curl to the back of it?

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.