Copyright Silhouette School 2016. Powered by Blogger.


Trick to Cleanly Cutting Construction Paper with Silhouette

Silhouette Cameo, construction paper, cleanly cutting, Silhouette tutorialSo you've attempted to cut construction paper with your Silhouette and lemmeguess it basically looks like an infant gnawed up the edge of the paper and someone sprinkled construction paper dust all over your mat? Yeah, not pretty.  I don't cut a lot of construction paper for this reason, but sometimes my 6 year old asks for some basics shapes for her crafts and I don't want to use my "good" paper. Ahem....just bein' real.

I also use construction paper - specifically black - when going for the 'chalkboard' look. I was recently making a card in which I wanted to get the chalkboard look by using the white Silhouette Sketch pen on black construction paper.  (You can read my review of the white and metallic Silhouette sketch pens here.)  I didn't however like the idea of putting the construction paper directly on my currently-perfectly-sticky cutting mat.  The fibers in the construction paper tend to stick to the mat and the blade sometimes causes the paper to tear more than cut.

Soo...I had a moment of pure genius (IMHO).
I put down a piece of white cardstock onto the mat. Then I put down a few strips of double-sided tape pretty much stretching all the way across the card stock.   I carefully laid the construction paper down on over the tape and the card stock.

Silhouette Cameo, construction paper, cleanly cutting, Silhouette tutorial

I didn't press it down too firmly because you want to be able to peel the construction paper off away from the tape.

Silhouette Cameo, construction paper, cleanly cutting, Silhouette tutorial

LOOK!!  It cut perfectly (no gnawed edges) and it peel away from the tape beautifully AND the best part is...my mat is no worse for wear!

Silhouette Cameo, construction paper, cleanly cutting, Silhouette tutorial

If you're looking for the full tutorial on my chalkboard-inspired Christmas card, you can find it here.

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

7 comments

  1. This is great! I can't wait to try this next time I need to cut construction paper... I assume this would work as well with textured "fancy" paper... as in artsy,pulpy, fibre-y paper... gotta experiment! Just a question though- what cut settings did you use for this? And what brand double sided tape? Did the design cut through the cardstock as well?
    Thanks!
    -Silhouette Angelika

    ReplyDelete
  2. Great idea, thanks for sharing. Love the new blog look, by the way. Especially no more ads popping up on the picture. Looks very professional.

    ReplyDelete
  3. What cut settings did you use for your blade?

    ReplyDelete
  4. Awesome Just tried it and it worked !!! Thanks

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.