Copyright Silhouette School 2016. Powered by Blogger.


Putting Vinyl on Wine Glasses: 7 Tips for Success

Putting vinyl on wine glasses and other curved glassware is something that many Silhouette crafters struggle with.

Vinyl wine glass, vinyl decals for wine glasses, vinyl lettering for wine glasses, silhouette 101, silhouette america blog

Today I'm going to share 7 tips for adding vinyl to wine glasses so it's straight.

Tips for Adding Vinyl to Wine Glasses

First things first: pick the right design. You want the Silhouette design to be the right size. If it's too big you will definitely have trouble getting it straight on the glass so I say simple and small-er are best.

If you are adding a monogram to a glass I find it easiest to cut each letter separately instead of welding them together for this very reason. Smaller designs are easier to position without wrinkling, bubbling, and warping.

I was making glasses for a friends for a girls' weekend.  She originally asked for a multi-line "Keep Calm and Drink Wine with Your Besties" saying on each glass.  Her other idea was #Forever39.

I immediately thought the suggestion of the Keep Calm phrase would be too big of a design.  Sure it can be done, but I didn't want to set myself up for a disaster knowing that the #Forever39 option she liked just as much and would be a lot less stressful!

vinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, silhouette beginner tutorials

Best Vinyl for Wine Glasses

Use the right vinyl. You want to cut on permanent adhesive outdoor vinyl like Oracal 651. This vinyl can withstand washing (by hand). It has a stronger adhesive on the back to give it a better stick which is ideal for smaller designs.  I'd recommend either a pack of Oracal 651 vinyl from Amazon or Swing Design - but check the prices!

Cut your design, weed, and then get ready to apply the vinyl to the wine glass.

But before you do, fill the wine glass with water.  I filled mine about half way...but how much water you use all depends on where you want your design placed.  The water line is a guaranteed straight line of reference.  I usually use painters tape, but on a wine glass there's risk it would not be level because of the slightly conical shape of the glass.

vinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, monograms

Use clear transfer tape to move your design from the vinyl backing to the glass.  Use the least amount of tape as possible. So cut the tape and the backing down as close to the vinyl as you can before peeling off the tape to transfer it to the glass.

vinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, transfer tape

Place the middle of the design down on the glass first lining up the bottom edge with the water line (left below).  Then work out from one side to the other making sure the bottom of the design is always level with the water line. (I apologize, in advance, for the really bad picture...)

vinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, transfer tapevinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, silhouette beginner tutorials

If you're having trouble with the design curving up or downwards slightly, use scissors to clip up into the transfer tape being careful not to cut the vinyl.  This just gives you a little wiggle room allowing the design to bend slightly back towards the water line.

vinyl decals for wine glasses, silhouette hacks, adhesive vinyl, wine glasses, silhouette beginner tutorials

When the entire design is on the wine glass, carefully remove the transfer tape and burnish the vinyl down again with a Silhouette scraper.

If you are doing more than one wine glass, pour all of the water into the next wine glass. This will ensure that all of the designs on every wine glass are in the same spot (so long as you don't spill any water while pouring)!

Vinyl wine glass, vinyl decals for wine glasses, vinyl lettering for wine glasses, how to put vinyl on wine glass, vinyl on wine glass diy

And yes, I add my "PS Hand Wash Only" stickers, made with my Silhouette and white sticker paper to all wine glasses with vinyl to remind people they're not dishwasher safe. Read the Silhouette Sticker 101 tutorial

Update: if you just watched my Facebook Live on putting vinyl on wine glasses, you can download the free (Don't) Stop Whinin' Silhouette design here.


Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.pngphoto 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

22 comments

  1. I use a hinge method! I take my design and cut around it as close as I can. Then I cut a few slits around the design without cutting the design itself. I take masking tape and tape the design (with backing still on it) halfway vertically to the surface. Then I remove one half of the backing, and press down the design and smooth it with an ID or Credit Card. I remove the tape and do the same for the other side and remove the transfer tape. It works like a charm every time!! I never thought of using the water as a guide though! That's a great idea!

    ReplyDelete
    Replies
    1. Please could you let me know where I can obtain the vinyl for this? would love to make some for Christmas.

      Delete
  2. While I am at it can you help me with this. I just did some iron and I don't know how to move it off to keep it straight, as I purchased the vinyl from Ebay. Any tips on how to pull it up. Or using the tradition red sticky paper you buy?

    ReplyDelete
  3. Thanks for this.! What kind of transfer tape are you using? <3

    ReplyDelete
  4. I have been struggling to get names and sayings right on pint glasses. This post is extremely helpful!!!! **Especially the water trick!*** Thank you so much for your brilliant blog!

    ReplyDelete
  5. what degree of the curve do I need to make to make my image curve to fit the wine glass better?

    ReplyDelete
  6. To help make stencils for angled glasses you can use the template that mimics a truncated cone. Just add the right measurements to the input screen.
    Use this site to create the right curve image. http://www.templatemaker.nl/index.php?template=cone&lang=en
    Then transfer the curve image to your Studio Software. Then create your text and "snap" the text to the top of the curve. Then you can convert your curved text to a graphic, remove the curve image and move the image freely about.

    ReplyDelete
    Replies
    1. Thanks so much for sharing this! I often find more gems in the comment section than the actual blog post!

      Delete
  7. I admire this article for the well-researched content and excellent wording. I got so involved in this material that I couldn’t stop reading. I am impressed with your work and skill. Thank you so much.
    best plastic wine glasses reviews

    ReplyDelete
  8. Adorable and lovely , it's very attractive and creative idea ,
    it's the best tip and useful ,
    I'm really appreciate thanks for your sharing !!!!!

    ReplyDelete
  9. Thanks for sharing this beautiful post.

    I have tried adding a vinyl design to the best wine glasses as they add that special touch for any occasion.

    ReplyDelete
  10. I'm using more "solid" design, the batman logo. I can get it to lay flat but part of it keeps lifting. How can I get it to stay flat?

    ReplyDelete
  11. Hello! I am wondering if you use a sealant after you apply the vinyl to the glass? If so which is the best one to purchase?

    ReplyDelete
  12. Oh my goodness, I love the water tip! Thank you!

    ReplyDelete
  13. Oh my goodness, I love the water tip! Thank you!

    ReplyDelete
  14. One of the best tips/tutorials out there. Thank you!

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.