Copyright Silhouette School 2016. Powered by Blogger.


Layering HTV Without the Bulk (Beginner Silhouette Tutorial)

So one color heat transfer vinyl isn't doing it for you and now you want to layer multiple colors of HTV? You've come to the right spot!

Layering HTV, heat transfer vinyl, Silhouette tutorial, Silhouette Studio, silhouette 101

This beginner Silhouette tutorial will walk you through how to layer HTV in the current version of the Silhouette Studio software (V4).  It builds on Heat Transfer Vinyl 101 and multi-color HTV so be sure you're up to speed on them before you continue here, because this Silhouette tutorial on HTV will assume you know the basics.


Let's say you have a design that you want to put on a shirt and it requires the vinyl to be layered.  The problem with multiple colors of heat transfer vinyl is that it can get bulky and stiff and make the shirt uncomfortable.

And that, my friends, is where I'm going to help you today....well, actually the 'subtract all' tool is going to help you.

I'm making a monogrammed onesie with the first letter initial in Siser Easyweed metallic silver HTV and the full name in glitter HTV.  Can I just take a minute to drool over this glitter HTV?  The color is awesome...it's the 'Jade' Glitter HTV from Siser  - go grab some, you won't be sorry.

Anyway, what we're going to do is open up Silhouette Studio.  Using the text tool type out the 'bottom' layer first so for me that's the single letter.  You can size it and pick your font. I went with font Times New Roman for both the single initial and the full name.

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, silhouette america blog

Now click the text tool again to get a new text box and type out the text for your top layer of vinyl.  For me that was 'Sophia.' Again, size it and pick your font.

Drag the top layer over the bottom layer and position it EXACTLY where you want it.   Here's where the magic happens. 

Layering HTV, heat transfer vinyl, layer without bulk, Silhouette cameo tutorial, monogram


Select both layers and from the Modify window click Subtract All.  You get these dark red lines around the overlapping areas.  You'll see why in a second...

glitter htv, heat transfer vinyl, layer HTV, Silhouette Studio v4, heat press

Now just select the top layer and move it away.  You can see that you have cut out the overlapping area from the bottom layer.  Do you see where I'm going with this?  (Note: If you resize from here on out, select both the layers and resize at the same time or the overlay won't fit correctly in your cut out!)

Layering HTV, heat transfer vinyl, Silhouette tutorial, subtract tool

You're not done yet.  You could cut like this and try to align the two layers, but you risk seeing a tiny bit of the shirt peeking through.

So to get around that...what you want to do is make a very small offset around the top layer.  This will create a very small overlapping area.

Open the Offset panel and with the name later selected click "Offset". This will put an offset with a default distance of .125" around the name.  This default offset is too large.

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, offset tool,

Instead you want to reduce the offset distance. The size you change it will depend on the design or font itself and the size of the design. I reduced my offset to .015.  That means a very, very small amount of the top layer will be layered on top of the bottom layer - but just enough that it will prevent any gaps between the HTV and the shirt.

Layering HTV, glitter heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, offset tool,

Now you're actually going to delete the original top layer (the red outline above) and cut the offset.   I've filled the bottom layer and zoomed in really close so you can see how the tiny offset will create just enough of an overlap to avoid a gap and prevent the shirt from peeking through.

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, offset tool

And one last very important step... MIRROR the images  by selecting both > right click > Flip Horizontally. Now you're ready to cut. 

Once the two layers are cut, weed them and get ready for the fun part!

CAMEO 4, Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4,

Flip the bottom layer - in my case the 'S' - onto the shirt and press it on there with your iron or heat press for a few seconds to just set it. Peel up the backing.

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, heat press

Take your top layer now and position it exactly over the cutout area and press it down like you normally would for HTV.  

Layering HTV, glitter heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, heat press 

Here's a close up...

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, layered HTV

Once you've pressed full amount of time, peel off that backing.  At this point I usually press the entire design one more time.

Layering HTV, heat transfer vinyl, Silhouette cameo tutorial, Silhouette Studio v4, offset tool

If you look at the shirt, it looks like the design is layered.  Since we cut out the overlapping sections, however, both the top and bottom top layers are actually directly on the shirt and not stacked on top of each other.  And that's how you layer HTV without the bulk and stiffness!

Layering HTV, heat transfer vinyl, layer without bulk, Silhouette tutorial, Silhouette Studio, onesie, vinyl

Note: If you're working with a layered HTV design that does not include text, the same basic method will work. 

More Glitter HTV Projects & Ideas...





Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I received a small commission.  That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine! 

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.pngphoto 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

5 comments

  1. The only part im tripped up on is the "So you're actually going to delete the original top layer and cut the offset." When I try to delete the inside cut line, which is the original top layer right?- I still see two lines. Thanks for the help!

    ReplyDelete
    Replies
    1. I could not figure out how to delete the red lone either.

      Delete
    2. You can Weld the letters.

      Delete
  2. Thank you for the great tutorial! If the top layer is a font that needs to welding, can you weld and group before using the subtract? Thank you!

    ReplyDelete
  3. Thank you for this tutorial it was very helpful can't wait to try this

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.