Copyright Silhouette School 2016. Powered by Blogger.


Silhouette Studio Compound Paths Tutorial: Welding Words to a Frame

Compound path, Silhouette Studio, welding, words, frame
Who's ready to learn about compound path's today?  They are perhaps the most confusing part of Silhouette Studio - at least for me anyway.  I'm going to try to make this as simple as possible so that we can all get through this together.  Once you 'get' compound path you'll really be rocking Studio.  We're gonna start basic and learn about how to weld words in a frame.   Our end project will end up looking like this...the key is compound paths so put on your big girl pants and get ready to conquer your fears of compound paths.

Alight the first thing we want to do is draw a box using the 'Draw a Rectangle Tool'.  This would also work with the circle or any other of the drawing tools...but let's not get ahead of ourselves.

Compound path, Silhouette Studio, welding, words, frame, draw a rectangle tool

Once you have your box, we want to make an offset of it so it actually looks like a frame and not just a box.   Highlight your shape and then click the 'Offset Selected Shape' button on the bottom tool bar. It looks like a little target.  I wanted squared off edges so I checked that box. You can also change the desired offset distance on the right side as well. 

Compound path, Silhouette Studio, welding, words, frame, offset tool

This next step is the MOST important when welding words to a frame.  Right now what you have is a box with a solid middle.  Think of it as a picture frame. The two squares make up the actual frame and the middle area is the frame's backing.  We want to get rid of the frame backing so that the inside of that frame is empty.   To do that we need to make the frame a compound path.   Highlight both the boxes at the same time > right click > make compound path. 
 Compound path, Silhouette Studio, welding, words, frame

Ta da! You did it. That wasn't so scary was it? You've essentially knocked out the middle of the picture frame so you can see right through it.  It is now negative space.  In just a minute I will show you how this project would turn out if you hadn't created the compound path.

Now you can add your text.  Type somewhere on the screen where the word is not going to touch the frame just yet.  I wanted my letters joined together to make one solid word, so I overlapped them and welded them together.  (More on welding here.)  If you don't weld your letters, I would recommend grouping them so they all move as a unit.  (I used the font HaloHandletter to type out 'hello')

Compound path, Silhouette Studio, welding, words, frame

Okay...it's time to weld the letters to the frame.  Position the letters so at least a small area is overlapping the frame as in the photo above.  Now highlight the entire design and weld it all together.  How cool is that?
 Compound path, Silhouette Studio, welding, words, frame

Here's another example of welding to a frame using a circle and a monogram.

Compound path, Silhouette Studio, welding, words, frame, monogram

Alright let's look at what this would have looked like had we not made the frame a compound path first.  If we had just made the box, made of the offset, added the text and welded it to the box the words and the box would have disappeared as shown in the bottom example.  The reason is because the box is still solid - the picture frame backing is still inserted.  When you weld without making the frame a compound path, the text is essentially being welded to the back of the frame therefore it's no longer visible because it becomes part of the backing.

Compound path, Silhouette Studio, welding, words, frame
I used my hello frame to make a greeting card.  After the welded frame printed, I cut a separate backing out of white cardstock. 

Compound path, Silhouette Studio, welding, words, frame

I love how it turned out.  A little cute and a little whimsy.  

I'll be sharing the cut file for the hello card exclusively in this week's 'Class Notes' newsletter so be sure you have subscribed!  You can do so in the bar at the top of the screen.

Compound path, Silhouette Studio, welding, words, frame

Thanks for coming to class today at Silhouette School.  If you like what you see, I'd love for you to pin it!


 photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpguse twiter photo Twitter_48x48_zps4e06061c.pnguse twiter photo Twitter_48x48_zps4e06061c.pngUse Feed photo Feed_48x48_zps63f27a4f.png photo 2b820f06-c93b-4b24-929c-96287390140f_zpsf3cd3a23.jpgUse Feed photo Feed_48x48_zps63f27a4f.pngUse Feed photo Feed_48x48_zps63f27a4f.png

12 comments

  1. Thank you so much for this, I had this exact problem trying to weld the letters in a circle and they kept diapering...now I know about compounding.

    ReplyDelete
  2. This was soooo helpful to me! Can't thank you enough. Off to weld some more.

    ReplyDelete
  3. Every time I want to do something on the silhouette, I come here and you teach me! You never cease to amaze me with your tutorials. Easy to understand. I've had this machine less than three months and everyone is amazed with the things I make, all due to these tutorials. :) thank you for all you do, it's VERY appreciated!!!!

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Hi. Thank you for the post. Can you add a link or put a post on Facebook with this cut file?. I'm on the mailing list since last august so I wasn't when this post was made. ;)

    ReplyDelete
  6. This is great I followed it and it worked beautifully, But I would like to make a frame in the middle of a card and then weld a shape for example a Christmas tree in the middle. But it wont work. what am I doing wrong or is their another step for it.

    ReplyDelete
  7. This is such a great site and I appreciate your work. I only found out about your site recently and subscribed, so am trying to watch older tutorials. How can you get the some of the cut files from these tutorials as I was not a member when you did them and supplied the cut files? I'd like to make this card but your last photo shows a longer uncut area than what was just created. I can't figure out how to get more solid area at the top of what we created - like your card turned out. Would love to have the cut file if possible. Thank you again.

    ReplyDelete
  8. Thank you, thank you, thank you. I finally figured out how to do this!

    ReplyDelete
  9. The Agru SP110S machine is the very latest in High Purity welding technology and will fusion weld pipes,fittings, and valves in PVDF, PP, PFA, and ECTFE. Welding Courses

    ReplyDelete
  10. What do you use to glue your little letters so they don't lift? I have done little designs on paper lots of times with a couple of different glues, but I always find it so tedious and I was wondering if you have a way to make it less so.

    ReplyDelete
  11. Thank you for sharing, I love the font! What font did you use?

    ReplyDelete
  12. I think I answered my own question. Thanks so much for this tutorial.

    ReplyDelete

Thanks for leaving a comment! We get several hundred comments a day. While we appreciate every single one of them it's nearly impossible to respond back to all of them, all the time. So... if you could help me by treating these comments like a forum where readers help readers.

In addition, don't forget to look for specific answers by using the Search Box on the blog. If you're still not having any luck, feel free to email me with your question.